User manual PRO-JECT BOX MM DC

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PRO-JECT BOX MM DC. We hope that this PRO-JECT BOX MM DC user guide will be useful to you.

Lastmanuals help download the user guide PRO-JECT BOX MM DC.

Download

Manual abstract: user guide PRO-JECT BOX MM DC

Detailed instructions for use are in the User's Guide.

 [. . . ] Pro-Ject Phono Box MM

INSTRUCTIONS FOR USE

Dear music lover,  thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. 

!

Warning of a hazard for the user,  the unit or possible misuse.  [. . . ] Never place any item containing liquid,  such as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never place any naked flame sources,  such as lighted candles on or near the device. The product shall not be used in damp or wet locations,  next to a bathtub,  sink,  swimming pool or any other similar conditions. 

!

Connectors

Audiophile Grade MM Phono Preamplifier

DC

!

Make all connections whilst the phono amplifier is disconnected from the power supply. Take care to connect the left and right channels correctly. The right channel is usually marked red,  the left channel black or white. Do not connect the phono amplifiers output to a phono input (sometimes labelled gram,  disc or RIAA) on the amplifier. Never use any other power supply than the one supplied with the unit. 

Connecting the record player (MM or high output MC cartridges only)
Connect the tonearm signal lead to the INPUT of the phono amplifier. The earthing wire may be connected to the screw terminal if you encounter hum problems when using the record player. 

Connection to the amplifier
Connect the OUTPUT of the phono amplifier to a line input (such as AUX,  CD,  Tuner,  Tape or Video) on your amplifier. 

2

© ATR-Audio Trade GmbH · Pro-Ject Phono Box MM · Revision 2013. 11. 1

Mains power connection
The phono amplifier is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the INPUT DC socket of the phono amplifier before connecting the power supply to the mains. 

Technical specifications Pro-Ject Phono Box MM
* typical for MM or high output MC cartridges Input capacitance/input impedance,  MM: 47kohms/120pF * Gain: 32dB Output voltage typically: 200mV/1kHz at 5mV/1kHz Noise floor: 88dB (A weighted) THD: <0, 05% RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0, 5dB Input: 1 pair RCA/phono sockets Line-level output: 1 pair RCA/phono sockets Outboard power supply: 18V/500mA DC,  suitable for your country's mains supply Power consumption: 20mA DC Dimensions W x H x D (D with sockets): 107 x 30 x 61 (75)mm Weight: 280g without power supply

Potential incorrect use and fault conditions
No signal on one or both channels: No connection between player and phono amplifier or amplifier.  [. . . ] The manufacturer reserves the right to make This guide was produced by: Audio Trade GmbH changes to the technical specification without prior Copyright © 2013. notice as deemed necessary to uphold the ongoing process of technical development. 

© ATR-Audio Trade GmbH · Pro-Ject Phono Box MM · Revision 2013. 11. 1

3 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PRO-JECT BOX MM DC

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PRO-JECT BOX MM DC will begin.