User manual PROEL M-8

[. . . ] This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the enviroment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. [. . . ] This switch allows you to hear signals through your headphones or control room outputs. The dual-purpose MUTE/ALT 3-4 switch serves two functions: muting, and signal routing where it acts as an extra stereo bus. It adjusts the level of the channel signal and send it to the MAIN MIX and to the CTRL ROOM/PHONES outputs on master section. Rotate this detented switch to select the preset effect you want to use. Dense, smooth reverb with long tail, long pre delay and some early reflections. Works well with vocals, electric and acoustic guitars, strings. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one. Dense, smooth reverb with short tail, normal pre delay and increased early reflections. Works well with vocals, guitars, woodwinds. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one. LARGE ROOM - This type of reverb reproduces the more intimate ambience of natural room acoustics. Feature very fast and scattered early reflections, long pre delay. Works well with vocals, woodwinds, strings. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one. SMALL ROOM - This type of reverb reproduces the more intimate ambience of natural room acoustics. Feature very fast and scattered early reflections, short pre delay. Works well with vocals, fingered guitars, drums. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one, alternating hall, tape, spring or plate types of reverb. The VARIATIONS vary from "bright" (1-8) to "warm" (9-16) starting from long tail to short tail for each one, alternating hall, tape, spring or plate types of reverb. PLATE - This is a simulation of metal plate reverb, as used on classic recordings from the '70s and '80s. The VARIATIONS vary from from long tail to short tail. [. . . ] You can set this level to a comfortable setting (or even off ) without affecting what gets recorded. Make sure the mains AC outlet is live (check with a tester or a lamp) · Make sure the 18V~ power supply input is securely plugged. ⷠMake sure your AC ADAPTOR has 18V~ on outputs (check with a tester) Make sure the signal level from the selected input source is high enough to light up some of the led meter, check it using the SOLO button in PFL mode. ⷠTry the same source signal in another channel, set up exactly like the suspect channel. [. . . ]