User manual PROEL RM200

[. . . ] Heat This apparatus should be placed away from heat sources, like radiators, heat registers, stoves or other products (including amplifiers) that produce heat. power sources · This apparatus should only be connected to power source type specified in this owner's manual or on the unit. ⷠIf the supplied AC power cable plug is different from the wall socket, please contact an electrician to change the AC power plug. grounding or Polarization: · All precautions must be observed to do not defeat grounding or polarization. [. . . ] For any problems not described in this owner's manual, please refer to qualified personnel only or consult PROEL or your National PROEL Distributor. Any improper operation could result in fire or electric shock. damages requiring services · Do not attempt any operations not described in this user's manual. ⷠIn the following cases please refer to an authorised maintenance centre or skilled personnel: - When the unit works improperly or it does not work at all. - If the unit does not operate normally or it exhibits a marked change in performance. - If the product has been dropped or it has been damaged in any way. Maintenance The user should not attempt any maintenance operation not described in this user's manual. All maintenance should be carried out by qualified personnel. iMPORTANT SAFETY INSTRUCTIONS · Install this unit following owner's manual instructions. ⷠDo not install, connect or disconnect power supply when the unit is powered, to avoid electric shock. ⷠDo not open the unit: there are no user serviceable parts inside. ⷠIf you detect any strong smell emanating from the unit, immediately turn it off and disconnect the AC power cord. ⷠDo not block the unit ventilation openings. For safety reason, do not defeat or bypass the grounding connection. This unit should be placed in a rack and kept far from: Wet / humid areas Direct exposure to heat sources (like sun light) - Non properly ventilated places Disconnect the power cord during storms or when the unit is not being used. In order to prevent fire and electric shock risks, it is necessary to keep the unit far from liquids. Please do not put cups, vases or other object containing liquids over the unit. In case of interference from source signal, the THD value will raise over 10%. Do not place this unit in confined spaces. Is not responsible for any damage that occurs due to a incorrect installation of the unit. Thank you for choosing this PROEL product and for your trust in our brand, synonymous of professionalism, accuracy, high quality and reliability. All our products are CE approved and designed for continuous use in professional systems. [. . . ] Could void your authority to operate the equipment. Licensing of wireless microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected frequency. Proel strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. This equipment may be capable of operating on some frequencies not authorized in your region. [. . . ]