User manual PROGRESS DIAMANT 850.0

[. . . ] 1989 (including Amending Directive 92/31/EEC) ­ EMC Directive. · Only connect the appliance to ­ 220/230 Volt ­ alternating current. · The mains circuit for the socket used must be protected with a fuse with a rating of at least 10 A. [. . . ] Without being changed over manually, the floor nozzle is entirely suited for daily vacuuming of carpets and hard floor surfaces such as parquet, tiles, linoleum, etc. Attaching the suction hose Insert the suction hose connector in the suction inlet. It locks in place and can be rotated all the way around. Press the release button and pull out the connector in order to remove the suction hose. Using the floor nozzle* For the daily care of carpets and hard floors. The floor nozzle may be changed over manually. The brushes can be extended for smooth floors and retracted for carpets. 10 Switching on Switching on and off You can switch the appliance on and off by pressing the On/Off button. Power adjustment: Crevice and upholstery nozzle stored in the appliance For specific cleaning requirements, two additional parts are included with the vacuum cleaner in an integrated accessories compartment*. Open the compartment by pressing gently as shown in the figure. The nozzles may be attached to the suction tube or the handle on the suction hose, depending on requirements. Power adjustment - Rotary control* The suction power can be varied to suit individual vacuuming requirements using the electronic power adjuster. Crevice nozzle For vacuuming crevices, gaps and corners. Power adjuster ­ Secondary air regulator* Using the regulator on the handle, you can reduce the suction power, e. g. when vacuuming light items (net curtains, rugs). The wider you open the regulator, the lower the suction power at the nozzle becomes Upholstery nozzle For vacuum cleaning all upholstered furniture, mattresses, etc. The thread lifting strips on the nozzle even pick up thread and lint. *depending on model 11 Maintenance and cleaning Prior to maintenance or cleaning, ensure that the appliance is switched off and that the mains plug has been removed from the socket: Bags full of normal household dust may be disposed of with household waste. Insert the new paper filter as far as it will go in the guide rails; only then can the lid be closed. The cover cannot be closed unless a paper filter has been inserted. Changing the microfilter We recommend replacing the microfilter at each fifth paper filter replacement, and at the latest when there is a clean dust bag and the dust level indicator is completely red with the nozzle raised. Changing the paper filter The paper filter must be replaced if the window on the filter replacement indicator is completely red when the appliance is operating at maximum power and the nozzle is raised from the floor. The paper filter should be replaced even if it does not appear to be full because fine dust can block the pores in the surface of the filter. Open the lid and fold up. Remove the used microfilter by means of the clean hygienic tabs (figure) and dispose of it with the household waste. Insert the new microfilter and close the cassette. The cover can be opened by pressing the button and folding back until it locks. HEPA filter A highly effective special filter belonging to Class "S". This filter offers relief and assistance to allergy sufferers. [. . . ] PROGRESS Serviceline unter 01805-30 60 80* Fax: 0911/ 3 23-49 19 30 E-Mail: info. service@progress-staubsauger. de *(Deutsche Telekom 0, 12 Euro/min. ) Staubbeutel, Filter und Zubehör Zum Erhalt der vollen Leistungsfähigkeit Ihres PROGRESS Staubsaugers empfehlen wir die Verwendung von PROGRESS Original-Staubbeuteln P58. Diese können Sie über unser Service Center unter 01801-20 30 90 bestellen. Weitere Informationen erhalten Sie im Internet unter www. progress-staubsauger. de Other Countries Further after sales service In these countries our sales organisations own warranty conditions are applicable. [. . . ]