User manual PUR LINE FANY 87

[. . . ] Do not operate if the fan guard is removed or damaged. This product is designed for household and light commercial use ONLY. Control panel LED indicator LCD Reflecting cover Front enclosure Rear enclosure Rotary support Base Remote Control Use the fan only as described in this manual. [. . . ] This fan should not be operated outside. Do not let the power cord hang over the edge of a table or counter. Arrange the cord away from an area where it may be tripped over. Never place the power cord under a carpet or rug. Pass the power cord through the channel on the stand, and firmly clasp the two halves of the stand together. Insert the base into the bottom of the housing 10 Being careful to align with the corresponding holes. Fix the base and main body together using the 2 screws supplied. To reduce movement of the power cord during use or transportation, place the power cord through the cut out on the bottom of the base. The fan can be controlled by pushing the buttons, which be setting on control panel or remote controller. ON/OFF Press the button once to turn your Fan ON, press the button again to turn your Fan OFF. Pull the cover in rearward direction and open it (figure 1) 2. (figure 3) NOTE: Follow the battery polarity markings moulded into the battery compartment to ensure that they are inserted correctly. The batteries contain materials, which are hazardous to the environment; they must be removed from the appliance before it is scrapped, dispose of the batteries responsibly. NOTE: when mode of breeze wind or sleep wind is selected, the fan will continually cycle through Low, Medium, and High setting. [. . . ] Do not use any cleaning detergents, sprays or any other chemicals as these will damage the unit. To use the warranty, please bring or send (PREPAID) the device to your reseller along with the proof of sale indicating the purchase date. And recycling rates of the materials that make them up and so reduce the impact on human health and the environment. [. . . ]