User manual PYLE PLCAPE12 INSTALL GUIDE

[. . . ] · SOUND ADJUSTMENT Press PUSH SELECT button (10) shortly to select the desired adjustment mode. The adjustment mode will change in the following order: VOL (Volume) BAS (Bass) TRE (Treble) BAL (Balance) FAD (Fader) · SET THE CLOCK Press the DSP button (15), the clock is shown on the LCD display. Then hold down the button until the clock flashes. Then press the TUNE/TRACK/SKIP button (17) to change hours or TUNE/TRACK/SKIP button (16) to change minutes. [. . . ] · PAUSING PLAYING Press PAU button (19) to pause MP3 player. · PREVIEWING ALL TRACKS Press SCN button (20) to play first several seconds of each track on the current disc. Press again to stop intro and listen to track. · REPEATING THE SAME TRACK Press RPT button (21) to continuously repeat the same track. · PLAYING ALL TRACKS IN RANDOM Press SHF button (22) to play all tracks on MP3 disc in random order. · SELECTING TRACKS BY AS/PS/DAUD BUTTON AS/PS button is assigned as Digital Audio Mode selection button in MP3 operation. When pressed, it is activated as 9 selecting each mode of Digital Audio. "Searching track directly" => "Searching Directory or File Name"=> "Navigation" from root by TUNE/TRACK/SKIP UP/DOWN buttons=> "Navigation" from current directory by TUNE/TRACK/SKIP UP/DOWN buttons. Searching Track Directly Press AS/PS (D-AUD) button for one time. It enters into "Searching track directly" in Digital Audio CD. The unit searches the track selected by following direct numeric buttons: M1-M6, MODE (7), TUNE/TRACK/SKIP DOWN (8), TUNE/TRACK/SKIP UP (9), DSP(0). If a bit rate of less than 48 kbps exists in a stream, that stream cannot be correctly played back. You are suggested to play the WMA stream data with the sampling frequency of 44. 1kHz and the bit rate over 128kbps, then you can get better effect. 2. The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW recorder or CD-R/ CD-RW software for more information on finalization process). Depending on the recording status, conditions of the disc and the equipment used for the recording, some CD-Rs/CD-RWs may not be played on this unit. (See *1) *1: To have more reliable play back, please see following recommendations: a. Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x. b. Use CD-Rs with speed 1x to 8x and write with speed 1x to 2x. Do not play a CD-RW which has been written for more than 5 times. Notes on MP3 files (MP3 Version Only): 1. The disc must be in the ISO9660 level 1 or level 2 format, or Joliet or Romeo in the expansion format. [. . . ] High temperature can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts. Clean the capstans and the pinch rollers with the cotton swab. Allow the tape head, capstans and pinch rollers to dry before operating. Do not touch the tape with your fingers; if it becomes lose, wind it back by twisting a six-sided pencil in the cassette reel. [. . . ]