User manual PYLE PLCD35 INSTRUCTION MANUAL

[. . . ] During Mp3 mode, press button allow you to skip forwards. Hold the For Mp3 playing (MP3 model only), these two buttons act as the digit 8 & 9 key. During RADIO mode, press and hold manual search channel. Then press or , you can have auto search channel. BAND BUTTON Press it to select your desired radio band and the band which is selected will be displayed on LCD. [. . . ] TA volume level), it will be set to the last level. When pressed long , it is selected EONTA LOCAL / EONTA DISTANCE mode. The purpose of this key is to reduce unwanted EON TA switching, which EON TA information was received from current station and the radio switched to that EON linked station, but no information could not be received because the EON linked station is located too far from that area. So the radio is switched back to current station again. In above operation, a customer listen to a wrong program or mute sound for a while. EONTA LOCAL mode When the filed strength level of EON linked is less than the threshold level, the radio does not switch that station, and a customer can hardly listen to any disturbances. When EONTA LOACL mode is selected, EONTA LO on numeric display is indicated for a few seconds. EONTA DISTANCE mode EON TA switching is try to implemented by the information of current station . When EONTA DISTANCE mode is selected, EONTA DX on numeric display is indicated for a few seconds. 4 BASIC OPERATION 17. PTY(PROGRAM TYPE) BUTTON This key is operated as follows: PTY MUSIC group- - PTY SPEECH group- - PTY OFF While selecting PTY TYPE, its selection is implemented by preset buttons as described in preset key. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. If corresponding PTY information is not existed any more, PTY type is automatically exit to normal mode. APS/MP3 BUTTON In radio mode: When short pressing, the radio searches for each preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for few secretary with releasing mute, and than searches again. In FMband, FM 1, FM 2 and FM 3 is checked one at a time. When long pressing (more than 1 second), the radio searches from the current frequency and checks the signal strength level until 1 cycle search is finished. And then 6 strongest stations are preset to the corresponding preset number. The AS operation is implemented in the each band of selected band. When the AS operation is finished, the radio executes the preset scan. In MP3 mode, press 0-9 and ENTER button to play the track in 1-108 number. MODE BUTTON Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation. For SUB WOOFER function(optional), press and hold for more than 2 seconds can have WOOFER Mode. [. . . ] The disc is extremely dirty or defective disc. The operation keys The built-in microcomputer do not work. Clean the disc or try to play a new one. Cool off or until the ambient temperature return to normal. [. . . ]