User manual PYLE PLCD39

[. . . ] PRE-SCAN/AUTO-STORE BUTTON This button allows you to enjoy "Preset Memory Scan" function by pushing it shortly, and "Auto-Store Memory" function by pushing it more than 2 seconds. * PS (PRESET MEMORY SCAN) - It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds. * AS (AUTO-STORE MEMORY) - It searches all station frequencies upward and memorize automatically 6 stations by catching the frequency which has scan-stop level, the memorized station is shown on LCD as "CH1. . . 6". [. . . ] MUTE CONTROL Press this button to mute the volume control and "MUT" will appear on LCD display. AUDIO / SETTING SELECT Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode. When pressing the button for more than 2 seconds, it activates as unit setting selection in cyclical mode as following. The unit setting can be changed by using either "VOL +" or "VOL ­" button. · DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M · BEEP OFF/ BEEP ON (not available for this model) · SEEK 1 (tune up/down button performs fast tune function) / SEEK 2 (performs auto tuning function when tune up/ down button pressed more than 1 second) · COLOR 1 / COLOR 2 (not available for this model) · VOL LAST / VOL ADJ (preset volume level when unit turn on) 16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button ) Press "SEL" button shortly and then pressing "+" or "-" button to adjust level of volume, bass, treble, balance or fader. · VOLUME - Press the (+) button to increase, or (-) button to decrease volume level. · BASS - While "BASS" is being displayed, press (+) button to increase or (-) button to decrease the bass level. · TREBLE - While "TREB" is being displayed, press (+) button to increase or (-) button to decrease the treble level. · BALANCE - While "BAL" is being displayed, press (+) or (-) button to level balance of speaker right and left. · FADER - While "FAD" is being displayed, press (+) or (-) button to level fader of speaker front and rear. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1 second can performs fast tuning function or auto tuning function. On CD mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track. [. . . ] It is recessed in order to prevent accidental engagement, and can be activated with the tip of a ball-point pen or any similar pointed object. This reset circuitry is provided in order to protect the unit's microprocessor, and should only be activated under the following conditions : a) Initial installation after all wiring is completed. b) Abnormal operation is encountered such as numerical indication on display is erratic. [. . . ]