User manual PYLE PLCD56MP

[. . . ] Plain washer INSTALLATION Removing the unit 1 2 3 Factory-installed radio bracket Car radio mounting bracket Screw After aligning the car radio mounting bracket with the factory-installed radio bracket, tighten the screws (M5x4mm) at 2 places on each side. When fixing factory-installed radio bracket with the screws, use a standard-tipped screwdriver to pry the tabs of the car radio mounting bracket to make them fit into the holes in the factory-installed radio bracket. Release Frame Key Insert the release frame key into the groove at the right side of the frame, then prize out to remove the frame. (You can also use the key to remove the frame from the left side. ) 3. [. . . ] · LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display (8). · EQUALIZATION Press EQ button (23) to turn on equalization function and to select desired audio mode. There are five kinds of mode as below: FLAT CLASSIC POP M ROCK M DSP OFF · RESET RESET button (25) must be activated with either a ball point pen or thin metal object. RESET button (25) is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. Note: If press RESET button (25), the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel. · AUXILIARY INPUT The unit can be connected to a portable audio player through the AUX IN jack (7). · REMOTE SENSOR Point the remote control handset to the remote sensor IR (26). Press the function keys on the handset to control the system. 8 OPERATION RADIO OPERATION · BAND SELECTION At tuner mode, press LOU/BND button (13) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM · AUTOMATICALLY MEMORY STORING & PROGRAM SCANNING - Automatic Memory Storing Press AMS button (18) for several seconds, the radio searches from the current frequency and checks the signal strength level until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. - Program Scanning Press AMS button (18) shortly to scan the preset station. "Searching track directly" in Digital Audio CD. "Searching File Name" in Digital Audio CD. "Searching File or directory" by file directory structure in Digital Audio CD. AMS button is assigned as Digital Audio Mode selection button in single CDP mode. When pressed, it is activated as selecting each mode of Digital Audio. "Searching track directly" ­> "Searching File Name" ­> "Searching File or directory" · Press AMS(MP3) button for one time. It enters into "Searching track directly" in Digital Audio CD. The unit searches the track selected by following buttons: M1-M6, MOD(7), MANU/SKIP DOWN (8), MANU/SKIP UP(9), DSP(0). · Press AMS(MP3) button for two times. It enters into "Searching File Name" in Digital Audio CD. The unit searches files and directories which have the same character which is inputted by the user. [. . . ] Compact disc is extremely dirty or defective disc. Insert the compact disc with the label facing upward. Clean the disc or try to play a new one. Cool off or until the ambient temperature return to normal. [. . . ]