User manual PYLE PLCD58MP3

[. . . ] Press SCAN button once again to stop scanning as desired. PRE-SCAN/AUTO-STORE BUTTON This button allows you to enjoy "Preset Memory Scan" function by pushing it shortly, and "Auto-Store Memory" function by pushing it more than 2 seconds. * PS (PRESET MEMORY SCAN) - It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds. * AS (AUTO-STORE MEMORY) - It searches all station frequencies upward and memorize automatically 6 stations by catching the frequency which has scan-stop level, the memorized station is shown on LCD as "CH1. . . 6". [. . . ] On CD/MP3/CDC mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD/MP3 track. STATION PRESET BUTTON (1-6) The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW. NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the button once. On CD / MP3 / CD Changer Mode · Preset 1 - press this button to pause the disc played. · Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc. · Preset 3 - press this button to repeat the current track of the disc. · Preset 4 - press this button to play disc at random order - Disc shuffle play. · Preset 5 - press this button to search -10 track (for MP3 Mode only). - press this button to search previous disc numbers (for CD Changer Mode only). · Preset 6 - press this button to search +10 track (for MP3 Mode only). - press this button to search the disc numbers ahead (for CD Changer Mode only). INSTRUCTION TO PLAY MP3 SONGS IMPORTANT NOTES · The MP3 file recording media acceptable to this unit are CD-R and CD-RW. · The MP3 formats acceptable are limited. · Do not attempt to play a media containing non-MP3 files or non-MP3 files with MP3 extension. Otherwise, the CD Mechanism will not working properly. If "ERROR" is shown, it is suggested to reset the radio by presssing the reset button. PLAY ON MP3 SONG · Insert the media with MP3 song in the disc slot. The unit will start playing and checks all the files and folder on the media. [. . . ] Otherwise, the unit will be damaged and no sound will come out anymore. The RESET button is located at the back of the panel. It is recessed in order to prevent accidental engagement, and can be activated with the tip of a ball-point pen or any similar pointed object. This reset circuitry is provided in order to protect the unit's microprocessor, and should only be activated under the following conditions : a) Initial installation after all wiring is completed. b) Abnormal operation is encountered such as numerical indication on display is erratic. [. . . ]