User manual PYLE PLCD71

[. . . ] The use of unauthorized parts can cause malfunctions. · Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle or the ship. · Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. · If installation angel exceeds 30¢Xfrom horizontal, the unit might not give its optimum performance. [. . . ] And then you can press VOL button (11) or VOL button (12) to set 24 hours mode or 12 hours mode. - When the currently displayed function has not been adjusted for several seconds, it will exit menu set mode. - When you have set CLOCK ON during power off state, LCD backlight will be turn on together. DISPLAY INFORMATION When pressed quickly, the DISP button (1) changes the display as follows. - In AM/FM mode: -> Frequency ->CLOCK -> - In XM mode: -> Channel Name -> Artist Name -> Song Title -> Category Name -> CLOCK -> - In CD mode: -> CD ->CLOCK -> - In CDC (or AUX) mode: ->CDC (or AUX)->CLOCK -> Each display time is 5 seconds, the display will return to the first position after 5 seconds. SET THE CLOCK Press the DISP button (1) shortly until the clock is shown on the LCD display. Then hold down DISP button (1) until the clock flashes. Repeat steps 1 and 2 to program additional stations. - Quick tuning Select the desired band, then press one of the ten preset buttons (14). SCAN Press SHIFT/SCAN button (13) to set function to scan mode, which scanning to higher frequency station with receivable signal and keep on each station for several seconds. SELECTING STATION Press CH button (16) or CH button (17) shortly to activate automatic seek function. Press for more than 3 seconds until "MANUAL" appears on the display, the manual tuning mode is selected. If selected a nonexistent channel, after the channel number was entered, each digit will be converted to dashes for 2s, then the display will return to the previous channel and settings. CD OPERATION SWITCHING TO CD MODE If there is no CD inserted in the driver: Gently insert the CD with the printed side uppermost into the CD compartment until you feel some resistance. The CD is drawn into the driver automatically. If a CD is already inserted in the driver: Keep pressing MODE button (6) shortly until the CD mode display appears. EJECTING A DISC Press (EJECT) button (4) to stop CD playing and eject the disc from the disc slot (5). PAUSING PLAYING Press / /MUTE button (3) to pause CD player. SELECTING TRACKS Press CH button (16) or CH button (17) to move to the previous track or the following track. Hold press CH button (16) or CH button (17) to fast reverse or fast forward. Disc play starts from when you release the button. DIRECT TRACK ACCESS Pressing number buttons 0~9(14) (i. e. 19~28) can activate DIRECT TRACK ACCESS according to your need. For example, press button (19), and "T-01" will be flashing on the display. [. . . ] Do not stick paper or tape etc. , onto the label side or the recording side of any discs, as it may cause a malfunction. Dirt, dust, scratches and warping discs will cause misoperation. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs): 1. Be sure to use discs with following marks only for the unit to play: Recordable Rewritable 2. [. . . ]