User manual PYLE PLCD88USMP

[. . . ] The power connections are not wired correctly. Wait for the road surface to improve before playing a disc. Be sure to use the rear strap if the vehicle does not provide support for the rear of the unit. If it plays properly, the first disc may be defective. [. . . ] POWER BUTTON Press it to turn on or off the unit. VOLUME MODE SELECTING AND LEVEL UP OR DOWN BUTTONS Press SEL button to select the audio mode such as volume, bass, treble, balance and fader. Press the + or - button to adjust the sound level of them. 1-6 preset memory buttons Select the desired band, then tune for the station you want to store in memory, and then press and hold one of 1-6 preset memory buttons for more than 2 seconds to store the broadcasting station to the preset memory. Every preset memory button can be stored only one station for each band, so the car audio system can be stored 30 stations. After finishing the storing operation, select the desired band and then press one or the six preset memory buttons to quickly tune for the desired station. AMS BUTTON(Automatic Music Select System) In tape mode, press AMS button to turn on the AUTOMATIC MUSIC SELECT SYSTEM. Then if you press FF or REW button, it allows you to skip forward or backward to the beginning of a particular selection. Press AMS button again to cancel AMS mode. DISC SELECTING BUTTONS The disc is defective. The unit does not work properly (Eject, Load, Play). 5. It is not advisable to use cassette tapes longer than C-60(30 minutes per side) in automobile players, since the tape is too thin and tends to become easily entangled. Always remove cartridge from your tape player as soon as play is finished. 6. The capstan and tape head should be cleaned about once every six months with a soft cloth or cotton-wool swab, moistened with alcohol. This will serve to maintain the richness and clarity of sound, and prevent loss of volume. Do not use a screwdriver, or ferrous metal rod , in carrying out the above cleaning. See illustration. 17. RPT/METAL BUTTON In tape play mode, If a metal tape is used, press METAL button to make the player in metal play mode, and MTL is indicated on LCD. In CD player mode, press it to play the current track repeatedly. Press it again or eject the disc to cancel this mode. In CD changer mode, press it to play the current track repeatedly. Press it again to play the current disc repeatedly. 18. RDM/PAUSE BUTTON In CD player mode, press it to play the track in random order. [. . . ] In tape mode, press it to pause tape playing, press it again to resume tape playing. 20. RELEASE BUTTON Press it to detatch the front panel when you want to take it away. 7. A loosely wound cassette tape will get damaged. Prior to using such tape, tighten it in a manner as guided by Fig. 2. A carelessly would cassette tape will cause unnecessary pressure on the tape resulting in the cassette springing out while the tape is running . For prevention, rewind the tape through fast for warding or rewinding. SPEAKER CONNECTION ANTENNA PLUG CDC SOCKET DISC PLAY: Cleaning discs: Before playing, clean the disc with a clean, lint-free. [. . . ]