User manual PYLE PLCDCS90 Instruction Manual

[. . . ] LCD (LIQUID CRYSTAL DISPLAY) TROUBLE SHOOTING Before going through the check list, finish wiring connection. If there still are any question after finish testing the items in the following list, consult your nearest service dealer. 4. CD EJECT BUTTON In CD player mode, press it to eject the disc. Symptom The compact disc or tape does not play when inserted into the unit. [. . . ] The unit does not work properly (Eject, Load, Play). The microcomputer has been affected by electrical noise. The radio does The signals are weak. not stop on any stations when automatic tuning is used. In CD changer mode, press the DISC + button to select the next disc and the DISC - button to select the preceding disc. INSTALLATION 13. LOUD/SUB WOOFER Press it shortly to enhance the bass effect during bass mode. Press it more than 2 seconds, SUB WOOFER will be turned on. then press SEL button to select the sound mode such as volume, bass, treble, balance and fader, and then press + or - button to increase or decrease the volume level of the selected sound mode. Press it more than 2 seconds again to turn off the SUB WOOFER. 14. TAPE BUTTON Press it to switch from radio, CD player or CD changer mode to tape mode. In tape mode, press it to make the player automatically switch to the opposite side of the tape when the tape reaches the end of one side. 15. CD/CD-CH BUTTON Press it to switch from radio or tape mode to CD player or CD changer mode. (Press it again to pause playback when no CDC connection) 1). When a disc is loaded in the disc compartment and the CD changer is not connected, the mode changes like this: Radio/Tape CD player CD player pause 2). When a disc is not loaded in the CD player and the CD changer is connected, the mode changes like this: Radio/Tape CD changer CD changer pause 3). When a disc is loaded in the CD player and the CD changer is connected, the mode changes like this: Radio/Tape CD player CD changer KEY PLATE KEY PLATE PLASTIC TRIM OUT DASH BOARD METAL MOUNTING STRAP HEX NUT SPRING WASHER PLAIN WASHER PLAIN WASHER TAPPING SCREW CONSOLE SLIDE BRACKET HOUSING HEX BOLT 16. SCAN BUTTON In CD player mode, press it to search each song for 10 seconds, press it again to stop scanning and retain the song currently selected. In CD changer mode, press it to search each song for 10 seconds, press it again to search each disc for 10 seconds, press it thirdly to stop scanning and retain the disc currently selected. If you want to take CHASSIS out of the SLIDE BRACKET HOUSING, remove the PLASTIC OUTLINE away, then insert the two KEY PLATE into left and right side of chassis as above illustration. PRECAUTIONS AND MAINTENANCE . 1. This unit is designed for negative ground operation only. The equipment can be used safely, if the negative terminal of the battery is connected to the vehicle metal work. [. . . ] Press the TRACK + or - button to select another random track. Press it again or eject the disc to cancel this mode. In CD changer mode, press it to play tracks on the current disc in random order. [. . . ]