User manual PYLE PLCDUSB64MP3

[. . . ] The use of unauthorized parts can cause malfunctions. · Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle or the ship. · Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop, like an emergency stop. · If installation angel exceeds 30¢Xfrom horizontal, the unit might not give its optimum performance. [. . . ] Then press the button (17) to change minutes or button (16) to change hours. · DISPLAY PRIORITY Clock Priority Press and hold DISP button (1) while pressing button (16) to select Clock Priority. Pressing DISP button (1) while in Clock Priority will temporarily display selected station frequency (in RADIO mode) or track number (in CD/CDC mode) or state information (in AUX IN mode). Frequency Priority Press and hold DISP button (1) while 8 pressing button (17) to select Frequency Priority. Pressing DISP button (1) while in Frequency Priority will temporarily display clock. · SELECTABLE CLOCK DISPLAY Programs the unit to display the clock (selectable on/off) when the unit is turned off. While the unit is turned on, pressing and holding MODE button (6) and then pressing M2 button (20) toggles the selectable clock display. · LIQUID CRYSTAL DISPLAY Exhibit current frequency and activated functions on the display (8). · RESET Reset button (25) must be activated with either a ballpoint pen or thin metal object. The reset button is to be activated for the following reasons: - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. · PAUSE PLAYING Press /MUTE button (3) to pause CD player. · REPEAT THE SAME TRACK Press RPT button (22) to continuously repeat the same track. · PREVIEW ALL TRACKS Press INT button (24) to play first several seconds of each track on current disc. Press it again to stop intro scan and listen to track. · PLAY ALL TRACKS IN RANDOM Press RDM button (23) to play all tracks on the current disc in random. · PROGRAM CD TRACKS Use Program function to select up to 32 tracks to play in any order. Program works by allowing you to select a track number for each spot in the playing sequence. A CD must be inserted and in CD playing mode to use Program. Press MEM button (20) to enter Program mode, then "PGM" stars flashing and "P-01" icon appear on the display. Press button (16) or button (17) to choose track number. For example, 10 select track 6, then press MEM button (20) to memorize it and "P02" will appear on the display. [. . . ] Hold press button (16) or button (17) to fast reverse or fast forward. Disc play starts from when you release the button. · PAUSE PLAYING Press /MUTE button (3) to pause CDC player. · REPEAT THE SAME TRACK Press RPT button (22) to continuously repeat the same track. [. . . ]