User manual PYLE PLCM4200

[. . . ] For normal operation, press this button again for distance. SEEK CONTROL Press this button seeks to next higher receivable station. CD SLOT Holding the disc to insert into the disc slot. The disc mechanism will automatically engage into CD play mode. [. . . ] DSP CONTROL Press this button to select the sound effect (Pop, Rock, Classic, Flat). CLOCK CONTROL During radio and CD operation, press this button to call the time display on the incorporated quartz clock. Press CLOCK button and hold until the display flash and release. Press tuning button to set the HOUR and Press tuning button to set MINUTES. EJECT BUTTON Press the eject button will eject the disc. PANEL RELEASE BUTTON This button is used to release the panel that holds the front panel to the chassis. To detach the front panel, press the button so that the right side of the panel is released. Grasp the released side and pull it off of the chassis. To re-attach the panel, position the left side of the panel in place first and then press the right side of the panel until the mechanism locks it into place. 2. 3. 4. 5. 6. 7. 8. 10. Page. 2 P / N : 570-931612-03 11. CD CONTROL Press this button to activate the CD mode. On CD mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track. When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD track. STATION PRESET BUTTON (30 STATION PRESET BUTTON) The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was memorized. There are 6 preset buttons, giving you capability of storing 18FM/12MW. NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be stored in the button pressed. After this, the memorized station can be recalled by pressing the button once. On CD Mode Preset knob 1, press this button to play the first track of the disc Preset knob 2, press this button to repeat the specific track of the disc. Preset Knob 3, press this button to scan the first 10 seconds of all the tracks on the currently selected disc. [. . . ] "INT" will indicate on LCD display. Preset knob 4, press this button to play the disc at random order. Page. 3 P / N : 570-931612-03 WIRE CONNECTION RESET FUNCTION CAUTION : DO NOT GROUND ANY SPEAKER WIRES TO CHASSIS (-). INSTALLATION The RESET button is located on the front of main panel. It is recessed in order to prevent accidental engagement, and can be activated with the tip of a ball-point pen or any similar pointed object. [. . . ]