User manual PYLE PLD155EL

[. . . ] Use Authorized Service Centres Do not attempt to disassemble or adjust this precision product. Please refer to the Service Centre list included with this product for service assistance. For Installation The unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. USE THIS PRODUCT SAFELY When Driving Keep the volume level low enough to be aware of road and traffic conditions. When Car Washing Do not expose the product to water or excessive moisture. [. . . ] To return to normal playback, press on the on the front panel. remote control or If you play a DVD/VCD/SVCD, press on the remote control again to stop at the next picture (step function). If you play a CD/MP3/Picture CD, pressing on the remote control again is ineffective. Rapid Forward/Rapid Reverse Press & on the remote control or hold / buttons on the front panel for several seconds during playback. Each time the button is pressed, the speed of rapid forward/reverse changes according to the disc as follows. DVD: Normal Playback X2 X4 X16 X100 VCD/CD/MP3: Normal Playback X2 X4 X8 Slow Motion Playback (For DVD Only) Press / during play. Each time the button is pressed, the speed of slow forward/reverse changes according to the disc as follows. DVD: X1/32 X1/16 X1/8 x1/4 x1/2 In slow motion state, press on the remote control to recover normal playback. Skipping Track Press / buttons on the remote control or on the front panel during playback. to skip to the next track, and press Press to skip to the previous track. Note: For some VCD2. 0 discs (PBC/ buttons may be playback control), unavailable. Method: / buttons or use numeric buttons to input and confirm with ENTER button. 2) 2/32 Item: Angle Function: Display the current angle; it can switch to other angle. Method: / buttons or press ANGLE button. 7) Normal Item: Chapter Function: Display the current chapter number and the total chapter number; it can skip to the desired chapter number. Method: / buttons or use numeric buttons to input and confirm with ENTER button. 3) 0:01:45 Item: Sound Function: Display the current sound mode; it can switch between normal and 3D surround effect mode. For VCD: PBC 0:01:45 Stereo Normal Sound Move Select Item: Time Function: Display the elapsed time; you can input the time directly to the skip to the corresponding playback point. Method: Use numeric buttons to input 18 ADVANCED OPERATION 1) PBC Item: Track Function: When it is in PBC ON mode, it display "PBC" (only display, can't be changed); when it is in PBC OFF mode, it will display the current track number and total track number (such as "1/16") and it can skip to the desired track number. Method: When in PBC OFF, press / buttons or use numeric buttons to input and confirm with ENTER button. 2) 0:01:45 Note: The function is only effective when the LOGO is shown. That is to say, when no disc in, ejecting a disc and in stop mode or pre-stop mode when playing DVD/VCD, pressing PAL/NTSC is effective. [. . . ] · Check if the on/off button on the front of the player is set to on. NO PICTURE · Check if the monitor or TV is switched on. · Check if select proper mode, such as Disc Play mode and AV mode. DISTORTED PICTURE · Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge. [. . . ]