User manual PYLE PLDVD198

[. . . ] PLDVD198 OWNER'S MANUAL Mobile Video System Digital Audio Out-Coaxial PLL Synthesizer Stereo Radio DVD Player Automatic Memory Storing Full Detachable Panel Preset Equalization Multi-subtitle Languages Function Multi-audio Languages Function Multi-angle Function Parental Control Remote Control www. pyleaudio. com FEATURES Compatible with NTSC DVD (Video CD) This player can play discs recorded in either PAL or NTSC format. A single LSI chip now integrates all major DVD playback circuit functions including MPEG2 decoder, video D/A converter, and audio decoders. L/R stereo analog audio outputs for connection to existing head unit aux inputs. Supplied remote handles multi-function software (multi-language audiotrack/subtitle, multi-angle, multistory, etc. ), plus all basic functions. Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. [. . . ] The RESET button is to be activated for the following reasons: SET THE CLOCK Press the DSP button on the front panel, the clock is shown on the LCD display. Then hold down the button until the clock flashes. Then press the VOL button on the front panel or VOLUME + button on the remote control to change hours; press VOL button on the front panel or VOLUME button on the remote control to change minutes. 16 OPERATION - Initial installation of the unit when all wiring is completed. - All the function buttons do not operate. Note: if press RESET button, the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the front panel. RADIO OPERATION SWITCHING TO RADIO MODE Press MOD on the front panel or MODE on the remote control to select radio mode, the radio mode appears in the display together with the memory band and frequency. SELECTING THE FREQUENCY BAND During radio mode, shortly press BND/LOU button on the front panel or A-B (BAND) button on the remote control to select the desired band. The reception band will change in the following order: FM1 FM2 FM3 AM1 AM2 control to select between local and distant stations. Local setting for reception of strong station, and a distant setting for reception of weaker stations. This function is effect during AUTO SEEK operation. AUTOMATIC MEMORY STORING & PROGRAM SCANNING Automatic memory storing Press AMS button on the front panel or RPT (AMS) button on the remote control for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. Program scanning Press AMS or RPT (AMS) button shortly to scan preset station. STATION STORING Press any one of the preset buttons (1 to 6) on the front panel to select a station, which had been stored in the memory. Press this button for several seconds, current station is stored into the number button. MONO/STEREO Press L/R (ST) button on the front panel or ST (AUDIO) button on the remote control to select mono or stereo mode. You can sometimes improve reception of distant stations by selection mono operation. SELECTING STATION During radio mode, shortly press MANU/SKIP button on the front panel or (SEEK+) button on remote control to increase frequency by one step of channel spacing, and shortly press MANU/SKIP on the front panel or (SEEK-) button on remote control to decrease frequency by one step of channel spacing. The frequency is updated correspondingly on display. LOCAL/DISTANT Press LOC button on the front panel or PBC (LOC) button on the remote 17 OPERATION DISC (DVD/VCD/CD/MP3) OPERATION STOPPING PLAY Briefly press the (Stop) button to stop the unit playback, when button on the front panel or button on the remote control is pressed, normal playback will continue. Press (Stop) button twice to stop the playback and go back to initial Track/Chapter. RAPID FORWARD/RAPID REVERSE Press & during play. Each time the button is pressed, the speed of rapid forward /reverse changes according to the disc as follow. [. . . ] COMPLETELY DISTORTED PICTURE The disc format is not according to the TV-set used (PAL/NTSC). NO COLOR IN PICTURE The disc format is not according to the TV-set used (PAL/NTSC). DISC DOES NOT PLAY Ensure the disc label is upwards. Check if the disc is defective by trying another disc. [. . . ]