User manual PYLE PLRD102 Instruction Manual

[. . . ] They will be broken or cracked if disassembled or refitted. If the failure happened, please turn off the monitor and notify distributors or us. Don t let the display screen incur the pollution like dampness, dust, steam, lampblack, etc. [. . . ] Do not touch the record surface ( not printed side) Keep disc in the disc pack after playing; Do not expose disc under direct sunlight or high temperature; Do not stick label, write or use chemical on the surface of disc; If you use central heating in cold weather, you may find dews on the DVD player, which may make the unit can not work well. Then please cut off the unit for 1 hour to make it dry and wipe the disc by dry cloth. 2. MAINTAIN OF DISC A: some functions may not available for certain kinds of DISCS. B: some discs may not compatible with this unit. C: this unit can only play DVD-R/DVD-RW disc in video mode, and some files download from computer can not be read. D: broken, dirty or wet disc can not be read. E: some disc recorded by personal may can not be read for the format of recording. F: when play MP3 format , adopt special method to playing, because of the special MP3 format of document storage. G: should use to choose the file when play MP3 disc, closed by ENTER. 3. MAINTAIN OF REMOTE CONTROL A: Do not expose it in direct sunlight or put in on the instrument board B: Especially in summer, the high temperature there will make it distorted C: the unit may can not receive the signal from the remote control under direct sunlight, move it near to the unit S ^ . . . · , , , 1)Power ( control display) 2) 5) IR TRANSMIT 7) FIX PEDESTAL 9) LEFT LAMP 11) EJECT 13) BACKWARD 15) STOP 17) OPEN 3) MENU 4) + 6) LCD MONITOR 8) LAMP BUTTON 10) RIGHT LAMP 12) PLAY/PAUSE 14) FAST FORWARD 16) DVD INDICATOR 13 2 Installation BASIC TROUBLE SHOOTING Fault reason red wire goes to 12v +; black one goes to ground No power Fuse Blowout Power line unconnected no VD input No picture No dvd signals output Video lines unconnected battery protection paper unload Remote useless Aim at wrong direction No power Can not play bad disc disc load in mistake way Distortion Disc dirty Fast forward/ backward resolvent connect power correctly change fuse connect correctly to the power input video reset dvd connect video line again take out the paper aim at the receiver window change battery change better disc re-put disc clean disc Normally 3. INSTALLATION Use the 6 pieces of machine screws(4x20BA) , and fix the setting plate to the place, then assembly the unit of monitor to the setting plate. 3 12 REMOTE CONTROL FUNCTIONS 1. PDVD: DVD power 2. DISPLAY: show information about disc 3. PBC: when it plays super VCD, VCD2. 0, it can show menu of the song: song 1, song 2, --- choose number directly. Inhale / eject disc 6. GOTO: set time 7. L/R: right / left channel 8. PRO-GRAM: edit 9. PLAY/PAUSE: press once, it plays or stops play; press again , it returns. 10. STOP: stop play if press this button 11. 1~10: number 12. AUDIO: mode of audio 13. STEP: press this button, it will play next picture; press PLAY, it comes to normally mode. 14. TITLE: back to main page 15. MENU:menu 16. Next song WIRING DIAGRAM L/R AUDIO STEP MUNE RETURN U/L POWER 17. Fast backward 20. A-B: repeat play start part A to part B by press this button two times ( first press is A and the second is B), press third time, it stops repeat play. 21. RETURN: back to main menu 22. ENTER: confirm 23. : direction 24. SLOW: play slowly 25. ZOOM: zoom the picture with 4 class 26. SETUP: set 27. REPEAT: repeat play 28. VOL-: lower 29. VOL+: louder 30. ANGLE: video angle 31. SUBTITLE 32. MUTE 33. AV 34. U/L: display start up or down way 35. -: reduce 36. SEL: menu 37. +: increase 38. POWER: power of this monitor FILTER Video1 input (yellow) Audio R out (red) Video2 out ( yellow) Audio L out (white) Audio R in (red) Audio L in (white) CAR AUDIO(DVD OR VCD) BATTERY Wiring diagram Step 1 : please take out power signal cable from attached bag, long cable connect the thrum , as per arrow direction, with screen signal thrum insert it correctly Step 2: connect the power correctly, red cable is anode , black cable is cathode Setp 3: signal cable ( 1 way) is video input, one of red cable and white cable are left and right audio input, others are left and right output. ( please see the tag ) 11 4 FUNCTIONS 1)Brightness Enter into MENU, use + - buttons to adjust the picture s b rightness, can adjust the range in 0~100. [. . . ] 3)STOP Press it will stop playing 4)FAST FORWARD / BACKWARD press to fast forward and backward when playing DVD, while press to go on playing. 5)LAST/NEXT press to chose last or next song by remote control. 6)TURN TO APPOINTED MENU OR TIME press GOTO one time, will show following picture: Title 01/02 001 /001 SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP 1MIN 5MIN 10MIN 30MIN OFF SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP 4:3PS 4:3LB 16:9 SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP SYSTEM SETUP TV SYSTE SCREEN SAVER TV TYPE PASSWORD RATING DEF AUL T EXIT SETUP ---- Time 00:00:00 NO ADULT KID SAFE VIEW ALL present title total title present song total songs press on the remote control to present song, then input the number of the song or the time you want closed by ENTER, If the number is 10 above, press 10 and then the number. [. . . ]