User manual PYLE PLTNV66

[. . . ] Otherwise it may fall out of place when jolted. When extending the ignition, battery, or ground wire, make sure to use automotive-grade wires or other wires with a 0. 75mm (AWG18) to prevent wire deterioration and damage to the wire coating. To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit and don t hold the LCD Screen panel while it is opening or closing until it is completely opened or closed. Otherwise, the motorized mechanism will be damaged. [. . . ] Press ENTER key at least for 2 seconds to return to the previous menu. * When no key is pressed for 5 seconds, the menu will disappear. Bass /Mid / Treble can be adjusted from 14 level to 14 level. Use Key and place cursor (Yellow Bar) on Audio and Press ENTER key. 18 BASIC OPERATION 8. Do the same process as above to adjust Volume. Press ENTER key at least for 2 seconds on current screen to return to the previous screen. Press Menu key about 1 second to turn MENU off directly. Press MENU key until the monitor displays following picture. 5. Press ENTER key at least for 2 seconds on current screen to return to the previous screen. Press Menu key about 1second t o t u r n MENU off directly. Do the same process as above to adjust Navigation, Auto Dimmer and Beep Tone. The monitor displays following picture. 20 BASIC OPERATION 7. Each time you press ENTER key, Center changes as below FRONT --> REAR --> ALL --> OFF 8. Press ENTER key at least for 2 seconds to return to the previous screen. Use key and place cursor (Yellow bar) on Navigation and press ENTER key as picture below. Use Key and place cursor (Yellow Bar) on Sound Mix and press ENTER key. Use key and place cursor (Yellow bar) on Sub woofer and press ENTER key as picture below. 10. Each time you press ENTER key, Navigation changes as below. Press ENTER key at least for 2 seconds to return to the previous screen. Use key and place cursor(Yellow bar) on Hands free and press ENTER key as picture below. 4. Each time you press ENTER key, Sub Woofer changes as below. FRONT --> REAR --> ALL --> OFF 5. [. . . ] BAND (AM / FM) Each time this button is pressed, the band will be changed to FM1 FM2 FM3 AM1 AM2 2. PRESET SCAN / BSM Following your desired band selection, press P. S/BSM button about 2 seconds or longer, and then tuner will search until stations of sufficient strength have been found and will store them in sequence. The stored each station will playback for 5 seconds in sequence until you select one stored channel by pressing P. S/BSM one more. MANUAL (SEEK) UP/ DOWN To find out a desired station, press this button until `beep' sound is heard and then, press it shortly in no time moving to the very station step by step. [. . . ]