User manual PYLE PLVSMR7

[. . . ] POWER INDICATOR LIGHT When the system is on, the indicator light (2) will be illuminated. REMOTE SENSOR For option, the monitor can be supplied with the remote control according to the user's need. Through the remote sensor IR (3), you can use the remote control to execute TV operation conveniently. If there is a VIDEO/AUDIO system connecting to the monitor through the REMOTE jack (14) and AV INPUT jacks (18), through the remote sensor IR (3), you can use the corresponding remote control supplied with the VIDEO/AUDIO system to control the VIDEO/AUDIO system. [. . . ] (For the unit with NTSC system): MENU Bright Contrast Color Tint 16:9/4:3 32 32 32 32 Press VOLUME+ button (8) or VOLUME- button (9) to increase or decrease the level of the corresponding item. NOTE: For the unit with 5 inch TFT color monitor, there is no "16:9/4:3" item to display. TV/AV/AUTO Press the TV/AV/AUTO button (5) shortly to select among TV and AV mode. Press TV/AV/AUTO button (5) for about one second to enter into auto searching mode, then press CHANNEL+ button (6) to start searching TV channels and press CHANNEL- button (7) to stop searching. CHANNEL+ Press the CHANNEL+ button (6) to choose channel upward. CHANNELPress the CHANNEL- button (7) to choose channel downward. VOLUME+ Press the VOLUME+ button (8) to increase the volume level of the speaker. 5 LOCATION AND FUNCTION OF KEYS 9. VOLUMEPress the VOLUME- button (9) to decrease the volume level of the speaker. TFT LIQUID CRYSTAL DISPLAY The 7 inch TFT color LCD (10) can show the current state of the unit There also have another LCD for option, see FIG. A the 6. 5 inch TFT color LCD 11. SPEAKER There are two speaks (11) on the front of the monitor. The sound can be sent from the speakers if the unit isn't connected with earphone. BUTTONS DO NOT WORK Turn the unit off and on with the power button on the front of the unit. 7 BRACKET 3 (BKT3) 8 INSTALLATION HARDWARE (2) (3) (4) (5) (1) (6) (7) (8) (9) (a) (10) (b) (1) ASSY (Rotate combined bracket with Base A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (2) Base B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (3) Plastic tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 (4) Screw ( 3x10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (5) Position clip-screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (6) Clip screw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (7) Fastener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (8) Fix bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (9) Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (10)sponge (a) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (10)sponge (b) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Press the switch under the headrest of the car seat and pull out the headrest. Headrest Switch 2. Combine the base B (2) and the base A with steel ripple pipe (1), then place them on the poles of the removed headrest to select proper hole position to install the base. Remove the base from the handrest and loosen the two screws by using the screwdriver, then place the two plastic tubes (3) on the holes that you just selected, then adjust them to proper position as shown in diagram below. [. . . ] Remove the base from the handrest and loosen the two screws by using the screwdriver, then place the two plastic tubes (3) on the holes that you just selected, then adjust them to proper position as shown in diagram below. (3) Plastic tube 10 INSTALLATION 4. Place the Base on the poles of the removed headrest in good position, and then use four screws (3x10 (4) to fix the base A and base B. Install the headrest with the Base to the car seat in proper position, then use the screwdriver to rotate the two screws tightly to fix the base. 6. [. . . ]