User manual PYLE PPH5MA

[. . . ] Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Refer all servicing to qualified personnel. [. . . ] Integral 35mm pole mount receptacle with securing thumb screw. Multi-angle enclosure for front of house or stage monitor application. Delivers powerful bass down to 40Hz. The following guidelines will help you achieve optimum sound wherever you use your PPH5MA PPHP1595 loudspeakers: Raise the speakers as high as possible. For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality of sound. Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up sound from the speakers and "feed" the sound back through the sound system. If space is limited, point the speakers away from the microphones to reduce feedback. Input sensitivity (gain) Channel faders Master faders Disconnect the devices that are connected to your speaker one at a time. If the noise goes away, the problem is with the source or the connecting cable. Noise or hiss heard at output Noisy source device Microphones are pointed into the speakers Speakers feed back and howl when the microphone volume is turned up Equalizer settings art incorrect Excessive gain Move the speakers so they do not point the microphone's pickup pattern. Locate the feedback frequency and reduce it using an equalizer. Reduce the gain at the mixer and move the microphone closer to the sound source. 3 PPH5MA PPHP1595 SPECIFICATIONS Specifications · · · · · · · · · · · · · · Rugged, Light-Weight Co-Polymer Enclosure Multi-angle enclosure for Front of House or Stage MonitorApplication Power Rating: 375W RMS 900W Peak Integral Frame 15'' Woofer w/Dual Neodymium Magnets 2'' Kapton VC 1'' Titanium Compression Driver, Ferro-Fluid Cooled Frequency Response (±3dB): 35Hz-20kHz 1W@1M SPL: 108dB Impedance: 8 Ohms Crossover Frequency: 2. 8 KHz Inputs: Dual Speakon (Parallel) Integrated 35mm Speaker Mount Dimensions: 27. 5''H x 17. 5''W x 14. 1''D Weight: 35. 2 lbs. Frequency Response DBSPL /1. 0W /m 120 110 100 90 80 70 60 30 50 100 200 300 500 1K 2K 3K 5K 10K 20KH z 4 Place Stamp Here PYLE PRO Audio, Inc. 1600 63rd Street Brooklyn, NY 11204 All PYLE PRO products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier. Should the unit fail due to factory defects in material or workmanship, your unit will be repaired or replaced at the sole discretion of PYLE. [. . . ] To obtain warranty service, you must first call our Consumer Return Hotline at (718) 236-6948 to obtain a Return Authorization Number. # must appear on the outside of your package and on all paperwork relating to your return. When returning the unit to us for warranty service, it must be carefully packed and shipped, prepaid, to: R. A. #: _____________ PYLE PRO Service Center 1600 63rd Street Brooklyn, NY 11204 Limited Warranty Thank you for purchasing this PYLE product. [. . . ]