User manual PYLE PT652T

[. . . ] Do not remove the case and bottom panel Any inspections or adjustments inside the unit may lead to malfunctions and electric shocks. Do not touch any of the inside parts. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Ventilation warning The normal ventilation of the product shall not be impeded for intended use. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence within of the uninsulated product's * * The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Do not wipe with thinners WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture Wipe the panels and case from time to time with a soft cloth. [. . . ] Make sure not to confuse the left and right cables in connection. FM antenna connection Use FM 75-ohms terminals when connecting a 75 ohms coaxial cable from an outdoor antenna. AM loop antenna connection Connect the cord of the accessory AM loop antenna to the AM LOOP antenna terminals, and attach it to the accessory antenna holder. Attach antenna holder to a wall with the range of the loop antenna cord. When tuning into AM (MW, LW) stations, move the antenna to the left or right and set it in the direction which yields the optimum reception. * AM (MW, LW) reception is not possible with the loop antenna detached. Even if n outdoor AM antenna is erected, keep this loop antenna in place. * Do not bring the power cord or the speaker cords near the loop antenna since noise will be generated. * Do not bring the loop antenna near the display, otherwise it will affect the reception. PANEL INFORMATION 1 2 3 TUNING POWER UP ON/STANDBY DOWN PRESET STATIONS 1 2 3 4 5 6 7 8 9 10/10+ MEMORY AUTO BAND STEREO/MO. 8 7 6 5 4 1. ON/STANDBY SWITCH Press this button to switch "ON" the unit and press again to switch "OFF" unit into "STANDBY MODE". If the unit is left unattended for long periods, remove the AC cord from the power socket. TUNER DISPLAY The frequency of the station which has been in is indicated in digits. MHz units are used for FM frequencies and KHz units for AM frequencies. When the PRESET STATION switch is pressed, the current station number will be displayed. TUNING SWITCH (UP or DOWN) Press UP or DOWN to search your favourite station. Tuning can be performed either automatically or manually, depending on the setting of the tuning mode selector switch. Auto tuning: When the DOWN TUNING switch is depressed, the frequency which is tuned in is counted down and this countdown operation stops automatically as soon as the station is tuned in the LOCK indicator together with the relative frequencies will be continuously counted down without stopping when stations are tuned in until you release the switch. This will stop the automatic tuning operation when the lower frequency limit is reached, count-down changes over to count-up. [. . . ] MEMORY SWITCH Tune in the station you wish to preset. While this switch is held pressed, the MEMORY indicator will show. Then press the PRESET STATION switch to enter the tuned station into the memory within 5 seconds. PRESET STATION SWITCHES Up to 20 AM or FM stations may be preset at random. [. . . ]