User manual PYLE PT660A

[. . . ] Never connect or disconnect the power plug with wet hands since you may receive an electric shock. Remember to disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time. Do not wipe with thinners Wipe the panels and case from time to time with a soft cloth. Using any kind of thinner, alcohol or volatile liquid will mar the surface, cause blotching on the exterior and erase the markings and should therefore be avoided. Do not use insecticide sprays in the vicinity. [. . . ] Video (12) This switch is pressed when you want to listen to the audio signal from the video equipment connected to the "Video 1" terminal. Aux (13) This switch is pressed when you want to listen to the audio signal from the equipment connected to the "Aux" terminal. Phono (14) This switch is pressed when you want to listen to the records on the turntable connected to the PHONO terminals. Tone Control Tone Control Treble Volume (15) The treble sound is emphasized when the TREBLE knob is rotated clockwise from its center position while it is attenuated when the knob is rotated anti-clockwise. Tone Control Bass Volume (16) The bass sound is emphasized when the BASS knob is rotated clockwise from its center position while it is attenuated when the knob is rotated anti-clockwise. Enable Alarm Function Timer (20) Timer 1 (32), Timer 2 (29), timer 3 (20), Timer Off (5) 1. Timer 1: The amplifier will automatically turn on at the preset time. eg. ) If TIMER lights up and it is set to "AM 7:00" then the amplifier will turn on at that time. Timer 2: The amplifier will automatically turn off at the preset time. eg. ) I f TIMER lights up and it is set to "PM 10:30" then the amplifier will turn off at that time. Timer 3: The amplifier will automatically turn on and off at the preset time. eg. ) If TIMER lights up , then the amplifier will turn on at "AM 7:00" and will turnoff at "PM 10:30". 3 4 Timer Off All Timer Off 6 Amplifier operations MIN (21) In clock adjust or Timer adjust mode, when this button is pressed, the min can be calibrated. HOUR (22) In clock adjust or Timer adjust mode, when this button is pressed, the hour can be calibrated. Set Clock (24) The clock can be adjusted when this button is pressed in tuner mode. Mute (25) The Amp is mute when this button is pressed. 12/24 Hour Display (30) The timer display can be toggled between 12 hour and 24 hour by using this button. Set Timer (27) The timer can be adjusted when this key is pressed in tuner mode. Resume Balance (28) When in adjust balance mode, it can be resume L/00 R/00 immediately when this button is pressed. Timer Up (23) This button can be used to adjust the clock and timer. Other Operation Headphones Jack (17) Connect the plug on the stereo headphones for private listening. Adjust the volume so that it does not hurt your ears when using the headphones. Reduce the Master Volume first to protect your ears. Only Speaker A works if just pressing it's button on b). [. . . ] Press the SET ALARM button the second to activate TIMER 2 to set the desired alarm time. PTY (It will be available if the unit has tuner with RDS. ) APS ( it will be available if the unit has tuner) Auto program search. 9. 14. 9 Troubleshooting Guide If you have a problem with your PA-3039, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for services. [. . . ]