User manual PYLE PWMA120

[. . . ] Indicates the presence of important operating and maintenance (servicing) instructions. WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ' ' AVERTISSEMENT POUR PREVENIR LES RISQUES D'INCENDIE ET D'ELECTROCUTION, NE PAS ' ' EXPOSER CET' APPAREIL A LA PLUIE NI A L'HUMIDITE. 1 SAFETY INSTRUCTIONS 1. Read Instructions-All the safety and operating instructions should be read before the Video Cassette Recorder is operated. Retain Instructions- The safety and operating instructions should be retained for future reference. Heed Cautions and Warnings-All cautions and warnings regarding the Video Cassette Recorder should be adhered to. [. . . ] Eject Key Press this button to eject tape. 5. Stop Key Press this button to stop tape. 6. Rewind / Review Key If this key is pressed in the PLAYBACK mode, the VCR enters the reverse picture search mode, and "REW" indicator lamp will be blinked. If pressed in STOP mode, then the tape will rewind at high speed, the indicator lamp will up in red. 6 7. Play / Re-AutoTracking Press this key to playback a recorded tape, or to release special operation such as the search mode. In the playback mode the playback indicator lamp will be light in red, and Auto Tracking mode, this indicator lamp will blink. When the playback picture is noisy, press this key to operates Re-Auto Tracking. 8. Fast Forward / Cue Key If this key is pressed in the PLAYBACK mode, the VCR enters the forward picture search mode, and "FF" indicator lamp will be blinked. If pressed in STOP mode, then the tape will fast forward at high speed, the indicator lamp will up in red. 9. REC Key Press the REC key for at least one second to start recording. 10. DEW/HEAT Lamp When power is on, this indicator flashes red to indicate excessive moisture buildup inside the VCR. During the Hi-Fi STEREO tape playback mode, you can select the audio out channel. "Hi-Fi Hi-Fi "L" Hi-Fi "R" Mono Hi-Fi " 11. MENU (setting OSD, System and TV Tuner) 13. When the playback picture is noisy, this "RE - TRACKING" key will control the playback picture quality automatically. Press to switch between TV and VCR source. This switch is functioned only when RF OUT connects to TV antenna Input with setting of the TV channel 3 or 4. 10 SETTING THE MENU Setting the OSD (On Screen Display) MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 TV END:MENU 1. Press select key until the appropriate system is selected. ( "on" or "off" ) 3. On completion, press MENU key to exit the menu. Setting the Auto PLAY MENU OSD AUTO PLAY AUTO REPEAT RECORD SPEED VCR OUTPUT CH INPUT SIGNAL SHIFT: SEL: ON ON ON EP CH3 CATV END:MENU 1. Press shift key, until the cursor is placed in front of the "AUTO PLAY " option. Press select key until the appropriate system is selected. [. . . ] When searching and storing is completed, the TV mode will be displayed. NOTE : While searching and storing channels, no button will be operated. When the tab is removed, recording can not be performed. TO PREVENT ACCIDENTAL ERASURE - After recording, break off the safety tab with a screwdriver if you don't want to record over the tape. TO RECORD AGAIN - Cover the hold with cellophane tape. 14 TROUBLE SHOOTING Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your part may eliminate the trouble. SYMPTOMS There is no power to the VCR? CAUSE The power cord is not connected. The polarity of power cord is not correct. [. . . ]