User manual PYLE PWMA3600

[. . . ] The strap can be bent by hand to the desired angle. (Fig. Lever Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click. Pulling the levers upward and out to makes it possible to remove the unit. DIN REAR-MOUNT Installation using the screw holes on the both sides of the unit. 1 Fastening the unit to the factory radio mounting bracket. Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 places on each side. [. . . ] Adjust bass level using Treble Press SEL button (6) for two times. Adjust treble level using Balance Press SEL button (6) for three times. Adjust sound balance between left and right speakers using (7) and (8) buttons. Fader Press SEL button (6) for four times. Adjust sound balance between front and rear speakers using (7) and (8) buttons. · SELECTING PLAYING MODE When the screen display is drawn out, the unit would automatically switch into TV mode. By pressing MOD button (12), you can select desired playing mode among TV and radio. CAUTION: The unit cannot be switched into TV mode, when the car is running. So at this time, you just select playing mode in radio. · MUTE Press MUT button (3) to cut down sound output, "MUTE" appears on display. Press it again to resume the previous volume level. Initially the tuner seeks and memories the stations in local mode until 6 stations are fully occupied. Otherwise, seeking is proceeded in distance mode. 11 TV OPERATION · SELECTING RECEIVING MODE Press TV/AV button (17) to select among TVch/AV1/AV2. · SELECTING CHANNEL Press CH+ button (9) or CH­ button (10) to choose channel upward or downward · MENU CONTROL In TV mode Press MENU button (18) to switch the MENU CONTROL mode. And the main menu includes three sub-menus: PICTURE MENU, TUNER MENU and SYSTEM MENU. Press MENU button (18) for the first time: PICTURE TUNE SYSTEM MENU PIC ADJUST Press the MENU button repeatedly or press CH+ button (9) or CH­ button (10) to select the desired sub-menu then press CONTROL+ button (19) or CONTROL­ button (20) to enter the corresponding sub-menu to set. PICTURE MENU This menu includes all item of picture feature. The menu allows picture adjustment such as bright, contrast, color, and etc. The details please refer to PICTURE MENU. TUNER MENU This is to activate program setting. SYSTEM MENU This menu includes the items for system control, such as color, sound, language, and etc. The details please refer to SYSTEM MENU. PICTURE MENU PICTURE MENU BRIGHT CONTRAST COLOR SHARP TINT 20 25 45 63 10 Use CH+ button (9) or CH­ button (10) to select picture mode upward or downward. [. . . ] B/B CORING HALFTONE AUTO M ENGLISH ON ON ON 15 COLOR setup Use CONTROL+ button (19) or CONTROL­ button (20) to switch color mode among AUTO, PAL, N3. 58 and N4. 43. B/B CORING HALFTONE AUTO M ENGLISH ON ON ON SOUND setup Use CONTROL+ button (19) or CONTROL­ button (20) to switch sound mode among M, B/G, I and D/K. B/B CORING HALFTONE AUTO M ENGLISH ON ON ON LANG. (Language) setup Use CONTROL+ button (19) or CONTROL­ button (20) to switch between ENGLISH and CHINESE. [. . . ]