User manual PYRAMID PW1248US-X DATASHEET

[. . . ] In the interest of continually improving products, Olympus reserves the right to update or modify information contained in this manual. Checking the contents of the box or USB cable (CB-USB8) PYRAMID Setup CD-ROM AV cable (CB-AVC3) Digital camera Strap Stylus pen Lithium Ion Battery (LI-50B) USB-AC adapter (F-2AC) Other accessories not shown: Warranty card Contents may vary depending on purchase location. Names of Parts Camera unit 5 6 1 2 9 1 2 3 4 5 Connector cover Strap eyelet Multi-connector HDMI micro connector AF illuminator Self-timer lamp 6 Flash 7 Battery/card compartment lock 8 Battery/card compartment cover 9 Lens 10 Tripod socket 11 Speaker 3 4 7 8 10 11 2 EN 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 13 Microphone Zoom lever Shutter button ON/OFF button Indicator lamp Mode dial Screen button (record movies) q button (switching between shooting and playback) Wheel controller INFO button (changing information display) button (erase) A button (OK) button E button (menu guide) Attaching the camera strap Pull the strap tight so that it does not come loose. EN 3 Screen Shooting mode display 12 26 25 24 23 22 21 20 19 P WB AUTO ISO AUTO P 0. 0 00:34 3 4 5 6 7 8 9 1 Shooting mode . . . . . . . p. 15, 60 3 Flash. . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 20 Flash standby/flash charge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 31 5 Self-timer . . . . . . . . . . . . . . . . . . . . . . p. [. . . ] For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. Adjusting the brightness of the screen [s] s (Settings 2) s To adjust the screen brightness 1 Use FG to adjust the brightness while viewing the screen, and then press the A button. s To adjust the image processing function Press the A button when [Start] (Submenu 2) is displayed. The check and adjustment of the image processing function starts. Back MENU Set OK Playing back images on a TV [TV Out] s (Settings 2) TV Out Submenu 2 Video Out HDMI Out HDMI Control Submenu 3 NTSC PAL 480p/576p, 720p, 1080i Off On Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. Set the signal format to be given priority. If the TV setting does not match, it is changed automatically. Operate with the TV remote control. The factory default settings differ according to the region where the camera is sold. 50 EN To play back camera images on a TV Connection via AV cable 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Open the connector cover in the direction of the arrow. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) Connection via HDMI cable 1 2 3 4 On the camera, select the digital signal format that will be connected ([480p/576p]/[720p]/[1080i]). Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " Turn on the camera, and use FGHI to select the image for playback. The TV video signal system varies depending on the countries and regions. Select the travel destination time zone (z). Calibrating the touch panel [Touch Calibration. ] t (Settings 3) Touch Calibration. Touch the panel following the instructions on the screen. x*1 z*1, 2 *1 *2 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([Summer]) on. When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (z). EN 53 Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridge-compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. I button USB cable (supplied) 2 Turn on the printer, and then connect the printer and camera. Open the connector cover in the direction of the arrow. Multi-connector Printing images at the printer's standard settings [Easy Print] In the setup menu, set [USB Connection] to [Print]. 48) 1 Display the image to be printed on the screen. "Viewing images" (p. 21) Easy Print Start Custom Print OK 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. 54 EN Changing the printer's settings for printing [Custom Print] 5 Use FG to select the [Borderless] or [Pics/ Sheet] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([Off]). The image is printed to fill the entire paper ([On]). [. . . ] When this Warranty Certificate is not returned with the product. When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5 Olympus' sole liability under this warranty shall be limited to repairing or replacing the product and any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect in the product, and in particular any loss or damage caused to any film or lenses or other equipment or accessories used with the product or for any loss resulting from delay in repair, is excluded. Notes; 1 This Warranty is in addition to and does not affect the customer's statutory right. [. . . ]