User manual PYRAMID PW1255US-X DATASHEET

[. . . ] Before use, perform an advance check as described in this manual. Introduction Unauthorized copying of this manual in part or in full, except for private use, is prohibited. Unauthorized reproduction is strictly prohibited. shall not be responsible in any way for lost profits or any claims by third parties in case of any damage occurring from improper use of this product. Please read the following items before use This Case is a precision device designed for use at a water depth within 40 m. Please use the Case correctly after sufficient understanding of the contents of this manual in regard to handling of the Case, checks before use, maintenance, and storage after use. [. . . ] 19 Install the O-ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 How to Apply Grease to the O-ring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Replace consumable products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 8. Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 EN 4 Supplied accessories for PW1255US-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparations Check the contents of the package Check that all accessories are in the box. Contact your dealer if accessories are missing or damaged. · Case body (Check that the O-ring is installed. ) · Silica gel (1g) · Silicone grease · O-ring remover · Hand strap · Authorized distributors list/Authorized service centres list · Instruction manual (this manual) CAUTION: After purchase, be sure to do maintenance even in brand-new condition. Neglecting the maintenance may become the cause of water leakage. For how to maintenance the case, refer to P. 19. En EN 6 Names of the parts Open/close dial Slide lock Shutter lever ON/OFF button Accessory mount Body cap Optical fiber cable insertion slot, cap 8 Zoom dial *9 Mode dial knob *0 U button 1 2 *3 *4 5 6 7 *a *b *c *d ( (REC) button INFO (Info display) button G/Fn button F (Exposure correction) button/Cross-cursor button *e # button/Cross-cursor button *f OK button *g jY button/Cross-cursor button *h P button/Cross-cursor button *i MENU button *j (Erase) button *k q (Play) button l LCD monitor window m LCD hood n O-ring (POL-EP03) o LCD inner hood p Tripod seat En Note: Case operation parts marked by * corresponds to the operation parts of the digital camera. When the operation parts of the Case are operated, the corresponding functions of the digital camera will operate. 2 Turn the open/close dial counter clockwise. · The Case is sealed. Close CAUTION: · If the open/close dial is not fully turned, the Case will not be sealed. · Close the rear lid of the Case so that the lens cap or LCD hood strap doesn't catch. If it catches, water leaks may result. Check the operation of the loaded camera After sealing the Case, check that the camera operations normally. · Push the ON/OFF button on the Case and confirm that the camera turns ON/OFF. · Turn the mode dial on the Case and confirm that the camera mode switches properly. · Press the shutter lever on the Case and confirm that the camera shutter releases. · Operate the zoom dial on the Case and confirm that the camera's lens is controlled. · Operate other control button on the Case and confirm that the camera functions properly as intended. En EN 13 Water Leakage Test The final test after loading the camera is explained below. It can be performed easily in a water tank or a bathtub. The required time is about five minutes. [. . . ] (Be careful not to damage the groove with the tip of the O-ring remover. ) 3 Lift the O-ring, pinch it with your fingertips and pull it out of the Case. Remove any sand, dirt, etc. After visually checking that dirt has been removed from the O-ring, check for attached sand and other foreign matter, as well as for damage and cracks by squeezing the entire circumference of the O-ring lightly with your fingertips. Remove attached foreign matter from the O-ring groove with a clean cloth or a cotton swab. Also remove any sand or dirt attached to any part of the Case that comes into contact with the O-ring. CAUTION: · When a sharp object is used to remove the O-ring or to clean the inside of the O-ring groove, the Case and the O-ring may be damaged and water leakage may be caused. [. . . ]