User manual QDI ADVANCE 10F

[. . . ] Declaration of conformity QUANTUM DESIGNS(HK) LTD. 5/F Somerset House, TaiKoo Place 979 Kings Road, Quarry Bay, Hong Kong declares that the product Mainboard Advance 10B/Advance 10F is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) EN 55022 EN 50081-1 EN 50082-1 Limits and methods of measurements of radio disturbance characteristics of information technology equipment Generic emission standard Part 1: Residential, commercial and light industry Generic immunity standard Part 1: Residential, commercial and light industry European Representative: QDI COMPUTER ( UK ) LTD QDI SYSTEM HANDEL GMBH QDI COMPUTER (FRANCE) SARL QDI COMPUTER (ESPANA) S. A. Signature : QDI COMPUTER ( SCANDINAVIA ) A/S QDI COMPUTER ( NETHERLANDS) B. QDI COMPUTER HANDELS GMBH QDI COMPUTER (SWEDEN) AB Place / Date : HONG KONG/2000 Printed Name : Lv Yan Position/ Title : Assistant President Declaration of conformity Trade Name: Model Name: Responsible Party: Address: Telephone: Facsimile: Equipment Classification: Type of Product: Manufacturer: Address: QDI Computer ( U. [. . . ] Color Graphic Adapter, powering up in 80 column mode. Monochrome adapter, including high resolution monochrome adapters. Halt On This category determines whether or not the computer will stop if an error is detected during powering up. No errors All errors All, But Keyboard All, But Diskette All, But Disk/Key The system boot will not stop for any errors that may be detected. Whenever the BIOS detects a non-fatal error, the system will stop and you will be prompted. The system boot will not stop for a keyboard error; but it will stop for all other errors. The system boot will not stop for a disk error; but it will stop for all other errors. The system boot will not stop for a keyboard or disk error, but it will stop for all other errors. Memory This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS. Base Memory Extended Memory Total Memory The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The BIOS determines how much extended memory is presented during the POST. Total memory of the system equals the sum of the above memory. Manual for Advance 10B/Advance 10F 2 9 Award BIOS Description SpeedEasy CPU Setup Figure-3 SpeedEasy CPU Setup The following indicates the options of each item and describes their meanings . Item l l Option Intel(R) Celeron(TM) 200MHz (66x3) Description BIOS can automatically detect the CPU model, therefore this item is shown only. CPU frequency should be set according to the CPU type. CPU frequency should be set according to the CPU type. For processors with 66MHz FSB you can choose from 200MHz (66X3) to 533MHz(66x8). For processors with 100MHz FSB, you can select from 300MHz(100X3) to 800MHz(100X8). For proces -sors with 133MHz FSB, you can select from 400MHz (133x3) to 1064MHz(133x8). The multiplier can be chosen from 3~8 or 7~12 . The BIOS will detect the CPU ratio and show the chooice range from 3 to 8 or 7 to12. However the multiplier setting will not function for bus ratio locked processor, only bus ratio unlocked processor. Selects the CPU host bus clock and PCI clock. CPU Model CPU Speed l CPU Ratio 3~8 7~12 l CPU Host/PCI Clock Close Empty DIMM/PCI Clk l Spread l Spectrum 66/33MHz . . . . . . 150/37MHz Enabled Disabled 0. 25% 0. 5% Closes empty DIMM or PCI clock to reduce EMI. Enables Clock Spread Spectrum to reduce EMI. Disables Clock Spread Spectrum to reduce EMI. Disabled Warning: Do not set CPU frequency higher than its working frequency. If you do, we will not be responsible for any damages caused. 30 Manual for Advance 10B/Advance 10F Chapter 3 Advanced BIOS Features Setup Figure-4 BIOS Features Setup Menu The following indicates the options for each item and describes their meaning. [. . . ] Do not press the "ESC" key to quit RecoveryEasy, this will save the change. Do not try to create the partition again, since creating partition will clear all the content of the partition. RecoveryEasy can implement the multi-boot function by activating different partition. For example on the hard disk, partition C contains DOS, partition D contains Windows 95 version, partition E contains Windows 98 version, when activating partition C in RecoveryEasy, the system enters DOS, when activating partition E, the system enters Windows 98 version. [. . . ]