User manual QDI K7T

[. . . ] Declaration of conformity QUANTUM DESIGNS(HK) LTD. 5/F Somerset House, TaiKoo Place 979 Kings Road, Quarry Bay, Hong Kong declares that the product Mainboard KinetiZ 7T is in conformity with (reference to the specification under which conformity is declared in accordance with 89/336 EEC-EMC Directive) þ þ þ EN 55022 EN 50081-1 EN 50082-1 Limits and methods of measurements of radio disturbance characteristics of information technology equipment Generic emission standard Part 1: Residential, commercial and light industry Generic immunity standard Part 1: Residential, commercial and light industry European Representative: QDI COMPUTER ( UK ) LTD QDI SYSTEM HANDEL GMBH QDI COMPUTER (FRANCE) SARL QDI COMPUTER (ESPANA) S. A. Signature : QDI COMPUTER ( SCANDINAVIA ) A/S QDI COMPUTER ( NETHERLANDS) B. QDI COMPUTER HANDELS GMBH QDI COMPUTER (SWEDEN) AB Place / Date : HONG KONG/2000 Printed Name : Anders Cheung Position/ Title : President Declaration of conformity Trade Name: Model Name: Responsible Party: Address: Telephone: Facsimile: Equipment Classification: Type of Product: Manufacturer: Address: QDI Computer ( U. [. . . ] Total memory of the system equals the sum of the above memory. Manual for KinetiZ 7T BIOS Description Frequency/Voltage Control Figure-9 Frequency/Voltage Control Menu The following indicates the options for each item and describes their meaning. Item l Option Enabled Disabled Default 100/33Mhz/-0. 5% 100/33Mhz/ 100/33Mhz/ 0. 25% 0. 5% Description Closes the CLK signal if no PCI or DIMM plug in. These items are of selected CPU FSB and PCI clock. Default setting is recom- Auto Detect DIMM/ PCI Clk CPU Host/PCI/ spread spec. l mended. 0. 5%, 0. 25%, -0. 5% means enable clock Spread Spectrum to reduce EMI 0. 5%, 0. 25%, -0. 5%. 102/34Mhz/off . . . . . . 133/33Mhz/-0. 5% 133/33Mhz/ 100/33Mhz/ 0. 25% 0. 5% Off means disable clock spread specturm to reduce EMI. Manual for KinetiZ 7T Chapter 3 Advanced BIOS Features Setup Figure-3 Advanced BIOS Features Setup Menu The following indicates the options for each item and describes their meaning. Item l Option Enabled Description Allows you to choose the VIRUS warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Enables CPU internal Level1/Level2 cache. Disables CPU internal Level1/Level2 cache. BIOS will shorten or skip some check items during POST to speed up POST after you power on the computer. It could be Disabled, Floppy, LS/ZIP, HDD-0, HDD-1, HDD-2, HDD-3, SCSI, CDROM, LAN. Exchanges the assignment of A&B floppy drives. The assignment of A&B floppy drives are normal. Anti-Virus Protection CPU Internal Cache l External Cache l Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled l l CPU L2 Cache ECC Checking Quick Power On Self Test First (Second, Third) Boot Device Boot other Device l Swap Floppy Drive l Disabled Disabled Floppy Enabled Disabled Manual for KinetiZ 7T BIOS Description l Boot Up Floppy Seek Boot Up Numlock Status Gate A20 Option Enabled Disabled On Off Normal Fast Tests floppy drives to determine whether they have 40 or 80 tracks. The A20 signal is controlled by the keyboard controller or chipset hardware. The A20 signal is controlled by Port 92 or the chipset specific method. Keystrokes repeat at a rate determined by the keyboard controller - when enabled, the typematic rate and typematic delay can be selected. l l l Typematic Rate Setting Enabled Disabled l Typematic Rate (Chars/Sec) Typermatic Delay (Msec) Security Option 6-30 250-1000 System Setup The rate at which character repeats when you hold down a key. The delay before keystrokes begin to repeat. Selects whether the password is required every time the system boots or only when you enter setup. If your operating system is not OS/2, please select this item. If system DRAM is more than 64MB and the operating system is OS/2, please select this item. Video Shadow will increase the video speed. Optional ROM will be copied to RAM by 16K bytes per unit. l l l OS Select For DRAM>64MB Non-OS2 OS2 l Video BIOS Shadow C8000~CBFFF Shadow: . . . DC000-DFFFF Enabled Disabled l Enabled l Shadow: Flash Write Protect Disabled Enabled Disabled l The shadow function is disabled. Note: Enabling this item can protect the system BIOS from being attacked by severe virus such as CIH. [. . . ] If users delete a partition in RecoveryEasy by mistake, they can save it by pressing the Reset button on their system at once. Do not press the "ESC" key to quit RecoveryEasy, this will save the change. Do not try to create the partition again, since creating partition will clear all the content of the partition. RecoveryEasy can implement the multi-boot function by activating different partition. [. . . ]