User manual QUANTUM 4000DLT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM 4000DLT. We hope that this QUANTUM 4000DLT user guide will be useful to you.
Lastmanuals help download the user guide QUANTUM 4000DLT.
Manual abstract: user guide QUANTUM 4000DLT
Detailed instructions for use are in the User's Guide.
[. . . ] The 4000/7000DLT Tabletop Series
Installation and Operation Guide
© Copyright 1999 all rights reserved. Quantum® is a registered trademark and DLTTM is a trademark of Quantum Corporation. All other trademarks are property of their respective owners.
Document number: 62-0162-01 Rev A First published: March 1999
Printed in the USA
ii
Contents
1
Introduction
Overview . 2-3 Front Panel Controls and Indicators . [. . . ] Do not operate the Cartridge Insert/Release Handle. Close door and let drive complete initialization. An error has occurred.
Operate Handle
Green
All Right Indicator Panel LEDs or, All Left Indicator Panel LEDs
-
ON Blinking
5-6
Operation and Maintenance
62-0162-01
Table 5-3
Operating Condition Indications Left Indicator Panel LED
Label 2. 6
Color Yellow
State ON Blinking
Operating Condition Tape is recorded in 2. 6 format. You selected this density for a write from BOT. You selected this density for a write from BOT. You selected this density for a write from BOT. You selected this density for a write from BOT. (Compression can be done only in 10. 0, 15. 0, 20. 0, and 70. 0 density. ) Compression mode disabled. You selected a density from the front panel. Density will be selected by the host (automatic). A POST error has occurred.
6. 0
Yellow
ON Blinking
10. 0
Yellow
ON (default) Blinking
20. 0 (4000/7000DLT)
Yellow
ON (default) Blinking
Compress
Yellow
ON OFF
Density Override
Yellow
ON OFF (default) Blinking
All Right Indicator Panel LEDs, or, all Left Indicator Panel LEDs
-
Blinking
Drive Operating Conditions
5-7
LCD Messages
Table 5-4 on page 5-8 describes the messages displayed by the LCD during normal operation:
Table 5-4
Drive Operation LCD Messages LCD Message
Drive Operating Condition No tape in drive.
or, `4000DLT' (DLT4000) When loading or unloading a tape.
DLTtype = DLT4000 (4000DLT), or DLT7000 (7000DLT). During the loading process the display may toggle between "Loading >>>" and "Calibrating>>>".
Note
While loading the tape, the drive will enter a false Ready Mode condition for a short period. During this false state the Tape In Use LED will continue to blink. Do not attempt any operations while the LED is blinking.
When tape is unloaded.
5-8
Operation and Maintenance
62-0162-01
Table 5-4
Drive Operation LCD Messages
When tape is loaded.
DLTtype = DLTTM4000 (4000DLT), or DLTTM7000 (7000DLT). Compressed if compression mode enabled or Standard if compression mode disabled. 20/40GB = DLTTM4000, 35/70GB = DLTTM7000. This is the normal "Ready Screen". If write-protected tape is inserted During loading of a write-protected tape, the display will change from: "Loading>>>" to "Write Protected Tape Inside Drive", the LCD backlight will toggle on/off and an audible alarm will sound.
Write-protected tape fully loaded.
WPT = Write Protected Tape in unit. WPT will toggle to GB and back to WPT and continue toggling until next drive action.
Drive Operating Conditions
5-9
Table 5-4
Drive Operation LCD Messages
Whenever the system is writing to a tape, these two messages will alternate. Each message will be displayed for approximately 2. 5 seconds.
DLTtype = DLTTM4000 (4000DLT), or DLTTM7000 (7000DLT). Compressed if compression mode enabled, standard if compression mode disabled. Writing indicates the system is writing to the tape. [. . . ] Dojde-li k ruöenÌ telekomunikaËnÌch nebo jinych za¯ÌzenÌ, je uûivatel povinen provÈst takov· opat¯enÌ, aby ruöenÌ odstranil.
CE Notice
Marking by the symbol indicates compliance of this tape library to the EMC (Electro-magnetic Compatibility) directive of the European Community. Such marking is indicative that this tape library meets or exceeds the following technical standards: EN 55022 "Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. " This system is an EN 55022 Class B device.
EN 50082-1:1997 "Electromagnetic compatibilityGenericimmunity standard Part 1: Residential, commercial, and light industry. " EN 61000-4-2 "Electromagnetic compatibility for industrial-process measurement and control equipment Part 2: Electrostatic discharge requirements. " - Severity level 3. "Electromagnetic compatibility for industrial-process measurement and control equipment Part 3: Radiated electromagnetic field requirements. " Severity level 2.
IEC 801-3
EN 55022 Compliance (Czech Republic Only)
C-5
EN 61000-4-4
"Electromagnetic compatibility for industrial-process measurement and control equipment Part 4: Electrical fast transient/burst requirements. " - Severity level 2.
EN60950:1992 + Amd. 1:1993 + Amd. 2:1993 with considerations to Amd. 3:1995 "Safety of Information Technology Equipment including Electrical Business Equipment. " A "Declaration of Conformity" in accordance with the preceding standards has been made and is on file at ADIC Europe, Z. A. du Bel-Air, 21 avenue Saint-Fiacre, F78100 Saint-Germain en Laye, FRANCE.
VCCI Notices (Japan Only)
This is a Class B product based on the standard of the Voluntary Control Council for Interfer-ence for information technology equipment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM 4000DLT Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service. Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM 4000DLT will begin.