User manual QUANTUM LTO-3 INSTALLATION

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual QUANTUM LTO-3. We hope that this QUANTUM LTO-3 user guide will be useful to you.

Lastmanuals help download the user guide QUANTUM LTO-3.

Download

You may also download the following manuals related to this product:

QUANTUM LTO-3 REV A01 (1536 ko)

QUANTUM LTO-3 QUICK START GUIDE 05-2007 (1171 ko)

Manual abstract: user guide QUANTUM LTO-3INSTALLATION

Detailed instructions for use are in the User's Guide.

 [. . . ] NOTE: If you have an internal drive,  refer to the other side of this card for installation instructions. 
Copyright © 2005 by Quantum Corporation. Quantum and the Quantum logo are trademarks of Quantum LLC. Other product names are trademarks or registered trademarks of their respective owners. Quantum reserves the right to change,  without notice,  product offerings or specifications.  [. . . ] Avoid touching any exposed parts on the printed circuit board. · Always place the drive on top of or inside the antistatic bag to reduce the chance of ESD damage. · Install LVD drives only in an LVD environment. Do not mix HVD and LVD devices on the same SCSI bus. · Due to the speed of the LTO-3 drive,  it is recommended that a maximum of one LTO-3 drive be connected to one host SCSI adapter. . NOTE: If you have a desktop drive,  refer to the other side of this card for installation instructions. 
Internal Tape Drive Jumper Settings Back Panel of the Internal Tape Drive

Before installing the drive,  read the following instructions: · Install LVD drives only in an LVD environment. Do not mix HVD and LVD devices on the same SCSI bus. · Due to the speed of the LTO-3 drive,  it is recommended that a maximum of one LTO-3 drive be connected to one host SCSI adapter. Unpack the contents of your drive package. If any item is damaged,  please contact your place of purchase immediately. In addition to the contents included with your desktop tape drive,  you need the following items: · A SCSI host bus adapter that is properly installed and configured in a host computer · A 68-pin SCSI cable · Backup application software that supports the tape drive. For a list of the latest backup software applications tested with the LTO-3 tape drives,  please visit our Web site at www. quantum. com/support. Review the drive's default settings and change them if necessary. (For detailed information,  please refer to your User's Guide on the Resource CD. ) · SCSI ID: 6 4. Attach the SCSI interface cable to either of the two 68-pin SCSI interface connectors on the back of the drive. 
SCSI Termination Examples for the Desktop LTO-3 Tape Drive
SCSI Terminators External SCSI device

Drive Configuration Jumper Pins

1. Turn off all power to the computer in which the drive will be installed. Unpack the contents of your drive package. If any item is damaged,  please contact your place of purchase immediately.  [. . . ] Turn on the computer,  turn on the tape drive,  and verify that the tape drive is operating properly. Register your tape drive at: www. quantum. com/registration. 

SCSI Termination Examples for the Internal Tape Drive
SCSI Terminator SCSI device (termination enabled)

External Tape Drive

9. To connect the tape drive to a tape library,  connect a serial cable to the RS-422 connector on the lower left side of the back of the tape drive. Connect a 4-pin power cable to the power connector on the back of the tape drive.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE QUANTUM LTO-3

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual QUANTUM LTO-3 will begin.