User manual QUANTUM PATHLIGHT VX 2.4.2 RELEASE NOTES 11-2006

[. . . ] For the most current information, contact ATAC. Table 1 Minimum EMC Flare Code Levels Pathlight VX-450 AX100SC Flare 191 02. 19. 100. 5. 007 1 Pathlight VX-650 CX-300 Flare 191 02. 19. 300. 5. 034 CX-700 Flare 191 02. 19. 700. 5. 034 ADIC-supported flare code is located on EMC's Service Partner Web under Licensed SW, Fixed Code Level bundles for ADIC, or for EMC SEs: http://www. cs. isus. emc. com/csweb2/dgweb/software/ADIC/index. htm. Table 2 Library Scalar 24 Drive and Library Firmware Levels Library Firmware 309A. GY002 308D. GY002 307B. GY001 6. 10. 0004 3. 34. 0003 3. 35. 0001 6. 03. 0005 640P. 0004 320G. GS004 402A. GS009013 402A. GS02001 311A. 00001 5050 3. 09. 00 3. 09. 00 LTO-1 Firmware 4561 4561 N/A 5AU1 4561 N/A2 5AU1 53J1 N/A 5AU1 4561 5AU1 N/A 4561 4561 LTO-2 Firmware 53Y2 53Y3 5AT0 5AT0 53Y2 53Y3 5AT0 53Y2 5AT0 5AT0 53Y2 5AT0 53Y2 4770 4770 LTO-3 Firmware 54K1 N/A1 N/A1 5BG2 N/A2 54K1 59D2 N/A2 64D0 64D0 5BG2 64D0 N/A1 N/A1 N/A1 Dell PV 132T IBM 3582 Scalar 100 (drive control path) Scalar 100 (library control path) Dell PV 136T IBM 3583 (drive control path) Scalar 1000 Scalar i500 Scalar i2000 Dell PV 160T Scalar 10K IBM 3584 STK L180 STK L700 1 2 3 This library supports LTO-3 drives. However, Pathlight VX does not support LTO-3 drives in this library. The library or library firmware does not support this drive. [. . . ] RAS ticket not created without Domain name in the Network setup. Need functionality to move virtual media from one virtual library to another. FC host reboot needed on HP-UX to see newly-added devices that should be seen with ioscan. Do not allow the user to create more virtual media than Pathlight VX will allow. The internal disks on the Management Server did not automatically rebuild. Realize operation fails to cancel if a retrieve has not completed. MSM tac logs fill up /usr when a physical library attached to the Pathlight VX does not have an I/E station. Intermittent problem: Pathlight VX User Interface header sometimes does not display. Physical library drive is offline, but the Pathlight VX indicates the drive is online. CR 34293 SR 312304 Refer to `Removing a Physical Library Attached to the Pathlight VX' in the Pathlight VX Maintenance Guide. Update the Domain name field in the Network setup field. Export the virtual media from the library. Reboot the FC host. CR 34614 CR 34618 SR 317230 SR 317578 CR 37531 SR 341950 CR 40252 SR 374270 Refer to Table 9 (Virtual Capacity Libraries, Drives, and Tapes) in the Pathlight VX Site Preparation Guide. Avoid canceling the realize operation if the retrieve process is not complete. Libraries and library partitions that do not have an I/E station should not be attached to the Pathlight VX. Refresh the screen. CR 41975 CR 42982 SR 387066 N/A CR 45318 SR 415886 SR 417402 SR 448032 N/A CR 47702 CR 48798 SR 450090 If the physical library reports the drive is offline, it is offline. Disregard the state indicated by the Pathlight VX. 4 © November 2006, ADIC Change Request Number CR 50669 Service Request Number SR 453404 Description When the utility module reboots due to power fluctuations, the Pathlight VX goes down. Need to improve the utility module power glitch tolerance so it will stay up like management server and FC switch for certain power fluctuations. Export failed due to prevent media removal set in a Scalar i2000 library. Possible Java errors with Microsoft patches for Windows XP that became available on December 13, 2005. Data Protector cannot move virtual media from the I/E station. The error reported is "medium removal prevented. " Workaround Provide regulated, consistent voltage to the Pathlight VX. There should be no spikes in the power supply. CR 51219 CR 52085 SR 470948 N/A Reboot the i2000 library. [. . . ] Online Service accounts are free from ADIC. That account can also be used to access ADIC's KnowledgeBase, a comprehensive repository of product support information. iLink - Securely links ADIC hardware and the diagnostic data from the surrounding storage ecosystem to ADIC's Global Services Team for faster, more precise root cause diagnosis. iLink is simple to set up through the internet and provides secure, two-way communications with ADIC's Secure Service Center. [. . . ]