User manual QUANTUM PATHLIGHT VX 2.4.3 RELEASE NOTES 07-2007

[. . . ] The library or library firmware does not support this drive. After upgrading i2000 firmware to version I3. 1 and above, with drive spoofing enabled, you must reboot the Pathlight VX. Note Pathlight VX 2. 4. 3 should run with earlier versions of drive and library firmware than listed in Table 2. However, as a best practice, Quantum recommends upgrading to the firmware levels in Table 2. Schedule a flare code upgrade within 7 days of the Pathlight VX upgrade. 2 © July 2007, ADIC The 2. 4. 3 release enforces use of Quantum-approved SFPs in the SNC's FC blades. [. . . ] RAS ticket not created without Domain name in the Network setup. Need functionality to move virtual media from one virtual library to another. FC host reboot needed on HP-UX to see newly-added devices that should be seen with ioscan. Do not allow the user to create more virtual media than Pathlight VX will allow. The internal disks on the Management Server did not automatically rebuild. Realize operation fails to cancel if a retrieve has not completed. CR 34293 SR 312304 Refer to `Removing a Physical Library Attached to the Pathlight VX' in the Pathlight VX Maintenance Guide. Update the Domain name field in the Network setup field. Export the virtual media from the library. Reboot the FC host. CR 34614 CR 34618 SR 317230 SR 317578 CR 37531 SR 341950 CR 40252 SR 374270 Refer to Table 9 (Virtual Capacity Libraries, Drives, and Tapes) in the Pathlight VX Site Preparation Guide. Avoid canceling the realize operation if the retrieve process is not complete. Otherwise, contact Quantum Global Services. Libraries and library partitions that do not have an I/E station should not be attached to the Pathlight VX. Refresh the screen. CR 41975 CR 42982 SR 387066 N/A CR 45318 SR 415886 SR 417402 SR 448032 N/A MSM tac logs fill up /usr when a physical library attached to the Pathlight VX does not have an I/E station. Intermittent problem: Pathlight VX User Interface header sometimes does not display. Physical library drive is offline, but the Pathlight VX indicates the drive is online. CR 47702 CR 48798 SR 450090 If the physical library reports the drive is offline, it is offline. Disregard the state indicated by the Pathlight VX. 4 © July 2007, ADIC Change Request Number CR 50669 Service Request Number SR 453404 Description When the utility module reboots due to power fluctuations, the Pathlight VX goes down. Need to improve the utility module power glitch tolerance so it will stay up like management server and FC switch for certain power fluctuations. Export failed due to prevent media removal set in a Scalar i2000 library. [. . . ] Import operation during Export function does not work, error "port in use. " CR 53911 Contact Quantum Global Services. CR 57667 SR 525020 The Service engineer doing the upgrade should consult Technical Bulletin 6-01175-88. Complete the Export operation prior to performing the Import operation. CR 62426 SR 560720 SR 563082 CR 63104 N/A When upgrading from Pathlight VX 2. 3, Build 9 to Pathlight VX 2. 4. 2 Build 27, Pathlight VX startup fails. Pathlight VX does not mount the file system automatically after a capacity upgrade. The MSM process ArcDisp terminates with signal = 11. Reboot the Pathlight VX. CR 63770 SR 509952 SR 524872 SR 611880 Contact Quantum Global Services. CR 66984 Contact Quantum Global Services. © July 2007, ADIC 5 Documentation The following documents are currently available for the Pathlight VX. [. . . ]