User manual QUANTUM SCALAR DISTRIBUTED LIBRARY CONTROLLER 2.5 INSTALLATION

[. . . ] Scalar Distributed Library Controller Installation Guide Document Number: 6-00659-02 Version 2. 5 Copyright Notice © 2000 - 2003 ADIC The information contained in this document is subject to change without notice. This document contains proprietary information which is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without prior written consent of ADIC. ADIC shall not be liable for errors contained herein or for incidental or consequential damages (including lost profits) in connection with the furnishing, performance or use of this material whether based on warranty, contract, or other legal theory. [. . . ] Using the Scalar DLC setup engine install the required Software Components on page 47. After this is finished, Install the Scalar DLC Software on page 51. Solution Checkup Make sure the appropriate solution is set up before installing the Scalar DLC. Refer to Setting Up the Basic Solution on page 7 or Setting Up the Cluster Solution on page 14. Software Components The following figure shows the components that are to be installed during the Scalar DLC setup process. The required components that are currently not installed are marked automatically for the installation. 47 Scalar DLC Figure 59 Scalar DLC Setup Components The following components must be installed and configured for the proper performance of the Scalar DLC software service: · · · · · · · Microsoft Windows 2000 Service Pack 4 Microsoft Internet Explorer ver. 6. 0 or newer, optional Java 2 Runtime Environment (Java 2) 1. 4. 1_03 Apache Web Server ver. 1. 3. 27 Secure Socket layer (SSL), optional Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) MSDE 2000 Service Pack 3 Silent Mode When a customer selects silent mode, all information that is required to the installation of the selected software components must be entered before the actual installation process starts. Note that the complene installation of both the required components and Scalar DLC software will take some time. The installation engine performs automatic restart of the PC, automatic logon after restart, and continue the setup process until everything will be done. Windows 2000 Service Pack 4 The SP4 for Windows 2000 operating system must be used with the Scalar DLC software. After the SP4 is installed, a restart is required. Then the system will configure the installed tools and services. ADIC supports the SP4 developed by the Microsoft. This service pack can be used with all versions of Windows 2000 OS (Professional, Server, Advanced Server, etc. ). 6-00659-02 NOTE: 48 Scalar DLC Microsoft Internet Explorer The Scalar DLC software is compatible with the MS IE browser 6. 0 or newer version. ADIC offers the MS IE 6. 0 installation kit. After the MS IE is installed, a restart is required. After rebooting, the system continues to configure the installed Internet Explorer tools and services. NOTE: The installation of MS IE 6. 0 under Windows 2000 is recommended but not required. Java 2 Runtime Environment The Java2 component installs over an existing Java runtime environment without producing a warning message. By default, the Java2 is installed in the <%SystemDrive%>\Program Files\Java\j2re1. 4. 1_03\ directory. An advanced user can install the Java2 to any directory desired, but ADIC recommends against this action. NOTE: If the installation proceeds on a clean PC, the Java2 installation asks for a restart. ADIC recommends rebooting the PC. Apache Web Server ADIC does not recommend installing the Scalar DLC software on a machine with a previously installed copy of Apache Web Server. During installation, the configuration file overwrites any configuration file present on the hard drive without providing a warning. By default, the Apache Web Server is installed in the <%SystemDrive%>\Program Files\Apache Group\Apache\ directory. An advanced user can install the Apache Web Server in any desired directory. If the default Apache directory exists, the installation provides a warning message. [. . . ] Remove Cluster Service from installed components. Open Add/Remove Programs > Windows Components and install Cluster Service component again. g. Usind Cluster Service Configuration Wizard add the new node (SDLCCLUST2) to the existing cluster. Refer to Configure the Cluster on page 30. [. . . ]