User manual QUANTUM STORNEXT 4.0 CLI REFERENCE GUIDE REV A

[. . . ] Quantum StorNext 4. 0 CLI Reference Guide Introduction Viewing man Pages File System Commands 5 5 6 cvadmin . 20 Storage Manager Commands 20 fsaddclass . 31 Document 6-01688-09 Rev A, March 2010 Quantum StorNext 4. 0 CLI Reference Guide Document 6-01688-09 Rev A March 2010 fsdrvclean . 61 Contacting Quantum 62 2 Contents Quantum StorNext 4. 0 CLI Reference Guide Document 6-01688-09 Rev A March 2010 Made in the USA. [. . . ] Separate multiple media IDs with a space. Separate multiple file systems with a space. The policy class associated with the data to clean. Separate multiple policy classes with a space. The value of this parameter should be less than or equal to the current time. Format is: YYYY:MM:DD:hh:mm:ss The default is the current time (all inactive versions removed for all times). [ -t <endtime> ]> -r [ <mediaID> ] Cleans all Tertiary Manager knowledge of files on media where rminfo processing has been done. If a mediaID is specified, then processing is restricted to only that media. Displays a list of all media where rminfo processing has been done. The file filename contains a list of files that need to be retrieved so missing copies can be regenerated. [ -l ] -p <filename> fsdirclass The fsdirclass command is used to display the policy class associated with the specified directory. Command Syntax fsdirclass <directory> Options / Arguments Table 20 lists options and arguments for the fsdirclass command. Storage Manager Commands 31 StorNext 4. 0 CLI Reference Guide Document 6-01688-09 Rev A March 2010 Table 20 Options and Arguments: fsdirclass Options / Arguments <directory> Description The directory path for which the associated policy class is returned. If preceded by a slash (/) provide the full path. Otherwise the path is resolved from the current directory. (The path must be less than 256 characters. ) fsdrvclean The fsdrvclean command is used to clean the specified drive. Command Syntax fsdrvclean <drivealias> Options / Arguments Table 21 lists options and arguments for the fsdrvclean command. Table 21 Options and Arguments: fsdrvclean Options / Arguments <drivealias> Description The alias of the drive to clean. A drive alias is a variable string of up to 255 characters. If the drive alias contains spaces, use single quotes around the string. (Use the fsstate command to list the set of drive aliases. ) fsfilecopy The fsfilecopy command is used to replace the primary copy (or a specified copy) of a file on a piece of media by duplicating it on another piece of media. Command Syntax fsfilecopy -r <filename> -d <destinationmediaID> [ -c <copynum> ] fsfilecopy -r <filename> [ -b ] [ -t <mediatype> ] [ -c <copynum> ] Options / Arguments Table 22 lists options and arguments for the fsfilecopy command. Table 22 Options and Arguments: fsfilecopy Options / Arguments -r Description Copies the file(s) filename to a piece of media and deletes all corresponding file(s) on the original piece of media. 32 Storage Manager Commands StorNext 4. 0 CLI Reference Guide Document 6-01688-09 Rev A March 2010 Options / Arguments <filename> Description The path of the file(s) to replace. If preceded by a slash (/) provide the full path. Otherwise the path is resolved from the current directory. Separate multiple file names with a space. Specifies the piece of media to which the file(s) are copied. Specifies the copy of the file(s) to replace. (If not specified, the primary copy is replaced. ) File(s) are copied to a blank piece of media. Defines the type of media to be used for replacement. [. . . ] Default value: 3 Time interval (in seconds) that the software waits for status before returning a timeout. Default value: 120 RPC program number for the software. Default value: 300016 [ -T <timeout> ] [ -V <number> ] vspoolqry The vspoolqry command is used to display information for a specified drive pool or for all drive pools. Command Syntax vspoolqry -a | <drivepool> [-v] [ -I ] [ -h ] [ -H <hostname> ] [ -P <priority> ] [ -R <retries> ] [ -T <timeout> ] [ -V <number> ] Options / Arguments Table 50 lists options and arguments for the vspoolqry command. 60 Storage Manager Commands StorNext 4. 0 CLI Reference Guide Document 6-01688-09 Rev A March 2010 Table 50 Options and Arguments: vspoolqry Options / Arguments -a <drivepool> [ -v ] [ -I ] [ -h ] [ -H <hostname> ] [ -P <priority> ] Description Displays information for all drive pools. Displays information for the specified drivepool. [. . . ]