User manual RADIOSHACK 3-IN-1 EASY REMOTE CONTROL

[. . . ] 15-1931. fm Page 1 Monday, July 19, 1999 2:26 PM Cat. 15-1931 OWNER'S MANUAL 3-in-One Easy Remote Control Please read before using this equipment. 15-1931. fm Page 2 Monday, July 19, 1999 2:26 PM FEATURES Your RadioShack 3-in-One Easy Remote Control can replace up to three infrared remote controls. You can use it to control your TV, VCR, or cable converter. Unlike some universal remote controls, your remote control is preprogrammed with the most commonly used commands and does not have to learn its commands from the original remote controls. [. . . ] Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly. To turn off the last device you selected, press PWR. To turn off other devices, press the device key for the device you want to turn off, then press PWR. PUNCH-THROUGH The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. Not all of the remote control's keys are used by every device. For example, a TV is often the only device that uses the volume keys. After you press TV, then press VCR, you can still use the volume control to control the TV. Note: The punch-through feature might not work if the last two devices you selected have the same (or similar) features. For example, most TVs and some cable converters have channel select keys on their remote controls. Turning Punch-Through Off/On If your cable box or VCR has a volume control, you might want to turn off punch-through so you can use the cable box's or VCR's volume control Need help?Call 1-888-533-7135 8 15-1931. fm Page 9 Monday, July 19, 1999 2:26 PM to control the sound. To turn off punch-through, hold down P until the red light blinks twice, then press 9 9 3 and the device key. If you want to control the volume through your cable box, press CBL before using the volume control. If you want to control the volume through your VCR, press VCR before using the volume control. To turn punch-through back on, hold down P until the red light blinks twice, then press 9 9 3 VOL . FAVORITE CHANNEL SCAN You can use your remote control to scan through up to 10 of your favorite channels on your TV, VCR, or cable box. Note: You can scan channels only for one device (TV, VCR, or CBL) at a time. You cannot set up a favorite channel list for another device until you clear the existing list. Press the device key for the device with the channels you want to program (TV, VCR, or CBL). Hold down P until the red light blinks twice, then press 9 9 6. Enter the channel number of the first channel you want to include in your favorite channel list. Notes: · Precede a single-digit number with a 0 -- for example, 01, 02, and so on. Need help?Call 1-888-533-7135 9 15-1931. fm Page 10 Monday, July 19, 1999 2:26 PM · If you enter a three-digit number, you do not need to press P after entering the number. Repeat Step 3 for other channels (up to 10) you want to include in your list. Then hold down P until the red light blinks twice. [. . . ] Dropping it can damage circuit boards and cases and can cause the remote control to work improperly. Use and store the remote control only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts. Keep the remote control away from dust and dirt, which can cause premature wear of parts. Wipe the remote control with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the remote control. [. . . ]