User manual RADIOSHACK 3-IN-1 FOOTBALL REMOTE

[. . . ] However, certain function keys, such as CH+ and CH­, might not work correctly depending on the type of device you are using. To avoid damaging the video tape, you must press RECORD twice to begin recording. · # -- Rewind J -- Play . "%#76+10". · · Use only fresh batteries of the required size and recommended type. Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. If you do not plan to use the remote control for a month or longer, remove the batteries. [. . . ] Otherwise, the remote exits the programming mode. 2. Press TV, VCR, or CBL to select the desired device type. Hold down SET until the red indicator blinks twice. If the code is valid, the red indicator blinks twice. Aim the remote control at the device and press PWR. If the device does not turn off, repeat steps 3­5, using another code listed in "Code List" for your brand of device until you find one that works. Repeat steps 1­5 for additional devices. 1. Manually turn on your TV, VCR, or cable converter. Press TV, VCR, or CBL to select the desired device type. Hold down SET until the red indicator blinks twice. Press 0000 for TV, 0080 for VCR, or 0120 for CBL. Press the appropriate button for your device (TV, VCR, or CBL). Hold down SET until the red indicator blinks twice. Aim the remote at your device and repeatedly press PWR until the device turns off. When the device turns off, immediately press the appropriate button for your device (TV, VCR, or CBL) to save the code. The red indicator blinks twice. ±"016'"±" If you press SET at any time except before entering the 4-digit code, the remote exits programming mode without saving your entries. You must then start programming from the beginning. %1&'"5'#4%* If you cannot identify the correct code for your device from the code list, follow these steps to search for the correct code. 12'4#6+10 1. Point the remote at the device and press PWR to turn it on. Press PWR to turn off the last selected device. To turn off other devices, press the desired device key, then press PWR. 6417$. '5*116+0) 2TQDNGO The red indicator does not blink when you press a key. The red indicator blinks when you press a key, but your device does not respond. The remote does not control the device or the commands do not work properly. [. . . ] RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 Changing channels does not work properly. %#4' Keep the remote control dry; if it gets wet, wipe it dry immediately. Use and store the remote control only in normal temperature environments. Handle the remote control carefully; do not drop it. Keep the remote control away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. 5'48+%'"#0&"4'2#+4 If your remote control is not performing as it should, take it to your local RadioShack store for assistance. [. . . ]