User manual RADIOSHACK 5-IN-1 LIGHT-UP REMOTE

[. . . ] 5-In-One Learning Light-Up Remote Owner's Manual Please read before using this equipment. ^ Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 A Quick Look at the Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Hold down P until the red light blinks twice. Enter the two-, three- or four-digit number for your favorite channel. Note: You can only program three channels for each macro key. Programming more than three channels will overwrite one or more of your original channel settings. 12 Preparation PROGRAMMING THE POWER KEY Your remote can store a power on/off sequence to control the power of up to four devices with a single key press. Once the desired sequence is stored, POWER acts as a master power key when held down for at least 2 seconds. Follow these steps to program the power key. Hold down P until the red light blinks twice. Press the device keys (TV, VCR, CBL/SAT, DVD, and AUX) in the desired order. Hold down P until the red light blinks twice to accept the program. Resetting the Power Key Follow these steps to reset the Power key to the default settings (delete the master power setup): 1. Hold down P until red light blinks twice. Hold down P until red light blinks twice. REASSIGNING DEVICES Although your remote is designed to control a TV, a VCR, a cable converter (or SAT receiver), a DVD player and an auxiliary device, you can reassign an unused device key (for example, AUX) to control another device, such as a second VCR. Hold down P until the red light blinks twice. Press 9 9 2 to start the program. Preparation 13 3. Press the device key for the device you are adding (for example, VCR) then press the device key for the unused key where the additional device will be assigned (for example, AUX). The red light blinks twice to accept the reassignment. Set up the reassigned key to control your device (see "Setting Up Your Remote" on Page 9). Note: Other reassignments are possible, including adding a second TV or second DVD player to an unused device key. Simply repeat Step 3 with your desired choices. Resetting Reassigned Device Keys If you have reassigned a key (for example, you reassigned the DVD key to operate a second VCR), and want to return to the default setting (for the example, DVD mode), follow these steps. Hold down P until red light blinks twice. Press the desired mode key (the key you want reassigned to factory default settings) twice. You can now set up codes for the original device. PROGRAMMING LEARNING You can program almost any key on your remote to learn a function that is unique to your home entertainment devices (for example, Tracking Up or Down for a VCR). Note: Please have your original remote controls handy before beginning learning programming. [. . . ] · If you have any other problems, call customer service at 888-631-9859. CARE Keep the remote dry; if it gets wet, wipe it dry immediately. Use and store the remote only in normal temperature environments. Handle the remote carefully; do not drop it. Keep the remote away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. [. . . ]