User manual RADIOSHACK ITZA 2

[. . . ] (Also see Setting Up Your Remote Control. ) 6. Repeat steps 1 to 5 for each key you want to convert. To convert a key back to its original function, repeat Steps 1 and 2, then press AUX twice. Punch-Through The punch-through feature lets you alternately control two different devices without pressing the device keys for each one. [. . . ] · Confirm that your remote-controlled devices are working properly by using the original remote control or the manual controls. · If some keys do not function, try a different device code. · Call 1-888-284-8735 to talk to technical support. Comtronics Contec Eastern Emerson Everquest Focus GC Electronics Garrard Gemini General Instrument GoldStar Goodmind Hamlin Hitachi Hytex Jasco Jerrold Memorex Movie Time NSC Oak Optimus Panasonic Paragon Philips Pioneer Popular Mechanics Pulsar Quasar RCA Radio Shack Realistic Recoton Regal Regency Rembrandt Runco SL Marx Samsung Scientific Atlanta Signal Signature Sprucer Starcom Stargate Starquest TV86 Tandy Teleview Tocom Toshiba Tusa Unika United Artists Universal Viewstar Zenith Zentek Device Types Use the remote control's device keys to control the following type of devices: · TV key ­ TVs Used to set up the remote control to replace original remote controls. Also used in normal operation to tell the remote control which device to control. · VCR key ­ VCRs and TV/VCR combinations · CBL key ­ Cable converters and satellite systems · AUX key ­ CD players, Video Accessories, and Home Automation systems Setting Up Your Remote Control 1. Refer to Manufacturer Codes and note the codes for your brand of device. Note: Some manufacturers have several codes. See the "If You Have Problems" section if you cannot find the correct code. 4. Point the remote control at your TV/VCR combination and press POWER. Your device should turn off (or on, if it was off). If the remote does not operate your device, try the other codes you wrote down in Step 1. Note: Some TV/VCR combinations require a second code to control volume. If you cannot control volume, use the TV code from "TV/VCR Combination Codes". USER GUIDE FEATURES Your RadioShack ITZA 2 Remote Control can replace up to four infrared remote controls. Use it to control your TV, VCR, TV/VCR combination, cable converter, CD player and more. Your ITZA 2 Remote Control includes a fun feature that sends your remote control into a colorful strobing light show. This manual lists many manufacturers' 4-digit codes for TVs, VCRs, cable converters, CD players, and more. Your remote control's features include: · Powerful Infrared Beam ­ lets you operate your remote-controlled devices from a greater distance than many original remote controls. · Large, Easy-to-Use Keypad ­ with buttons in the ideal positions for easy operation. · Toll Free Support ­ brings expert help for your remote control when you call 1-888-284-8735. OPERATION General Operation 1. Press the device key for the device you want to control. Point the remote control toward the device you want to control, then press the desired command keys. Repeat Steps 1 and 2 for all other devices you want to operate. Note: The command keys on the remote control work the same as the keys on the original remote control; however, the labeling might differ slightly. Note: To record, press REC twice. This helps avoid accidentally recording over tapes. MANUFACTURER CODES Use the following alphabetical list of device setup codes to locate the 4-digit codes to set up the remote control. Notes: · The ITZA 2 might not have every command from your original remote controls. · A key on the remote control that has the same name as a key on your original remote control might have a slightly different function. PREPARATION Installing Batteries Your remote control requires four AAA batteries (not supplied) for power. For the best performance and longest life, we recommend using RadioShack alkaline batteries. Cautions: 2. Press the device key for the type of remote you are replacing (TV, VCR, CBL, or AUX). Hold down P until the red light blinks twice, then enter the 4-digit manufacturer's code. [. . . ] RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. [. . . ]