User manual RADIOSHACK KAMELEON 4-IN-1 UNIVERSAL REMOTE CONTROL

[. . . ] After installing four (4) new AAA alkaline batteries (not included), you can immediately use the remote to control an RCA TV, VCR, and DVD Player, and a Motorola Cable Box. The RadioShack 4-in-One Remote Powered By Kameleon provides the versatility of an LCD remote control with the feel of a traditional push button unit. The result is a stunning, bright display with engaging animation and touch-sensitive graphics for the user. the remote control includes convenient Menu Driven programming. [. . . ] Press POWER once to select it as the search test function. the Search Programming screen will appear again. NOTE: With POWER as the search test function, a "Power On" IR command will be sent to the device each time a test code is sent. as a confirmation , the IR segments will animate. NOTE: If your device or its original remote control does not have a Power key, select a different test function in this step (e. , TV) press L one or more times and stop when a working code performs the test function selected in step 4. If desired, use M to try a previous code. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. To search for codes of your other devices, repeat steps 3 to 6, but use the appropriate device key and test function key for the device you are searching for. If you have set up the RadioShack 4-in-One Remote using the Searching For Your Code procedure (on the previous two pages), you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. Press and hold P until the bottom IR segment flashes twice. The bottom IR segment will flash twice and the Code Verification screen will appear. To view the code for the first digit, press 1 once. Count the number of times the bottom IR segment flashes (e. , three flashes = 3) and write down the number in leftmost box in the TV code boxes on page 11. NOTE: If a code digit is "0", the bottom IR segment will not flash. Repeat step 5 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. write down the code digits in the remaining TV code boxes on page 11. NOTE: If you enter an invalid number (e. , PLAY), the bottom IR segment will display one long flash and return to the "Other" programming screen. [. . . ] This product uses technologies licensed under one or more of the following U. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]