User manual RADIOSHACK MICRONTA 22-191 MULTIMETER

[. . . ] The displays are divided into two types of interactive screens: Device Menus for normal remote control use, and Programming Menus for feature setup. Acting like its namesake, Kameleon changes the Device Menu for the device being selected. for example , selecting TV displays a main menu that contains channel selection , volume control , and a keypad. However, selecting a DVD player still displays a menu with those same keys as the TV, but now navigation keys and transport controls are added for the DVD device. [. . . ] Once to return to the program keys Use the Setup Codes For DVD Player/VCR Combos (on page 70) to locate the brand name and use the number keys to enter the four-digit code for your device. if performed correctly , the bottom IR segment will flash twice. NOTE: If the bottom IR segment displays one long flash instead, an error has occurred. (Optional) If you've located a setup code that works, but it also has a separate VCR code as listed on page 70, you'll need to program it into the remote to access VCR controls, as follows: a. Using the number keys, enter the four-digit VCR code for your device. NOTE: If a VCR setup code is not listed, you can use the VCR key to program a separate VCR or another device (see "Reassigning Device Keys" on page 22). For future reference, write down the working code in the below boxes: DVD Player/VCR Code: If your device does not respond to the RadioShack 4-in-One Remote after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media. For example, to search for a code for your TV: 1. Press and hold P until the bottom IR segment flashes twice. Press POWER once to select it as the search test function. The RadioShack 4-in-One Remote is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device's volume will be locked to one mode (e. After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. Press and hold P until the bottom IR segment flashes twice. , VCR, TV, CBL/SAT, or DVD) where you want the volume controls locked to. The bottom IR segment will flash twice, and the program keys will appear again. Now, when you press VOL L, VOL M, or MUTE, the selected device's volume will be controlled, regardless of the mode selected. Press and hold P until the bottom IR segment flashes twice. The bottom IR segment will flash four times and the program keys will appear again. If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. Now, after you select a device that has volume unlocked, pressing VOL L, VOL M, or MUTE will control the device's volume only in its own mode. [. . . ] If your remote is not performing as it should, please contact us at: www. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics. Com are trademarks used by RadioShack Corporation. the RadioShack 4-in-One Remote Powered By Kameleon is compatible for use in North America. [. . . ]