Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual RANE SIXTY-EIGHT. We hope that this RANE SIXTY-EIGHT user guide will be useful to you.
Lastmanuals help download the user guide RANE SIXTY-EIGHT.
You may also download the following manuals related to this product:
RANE SIXTY-EIGHT V2.2 (5724 ko) RANE SIXTY-EIGHT V2.1 (5156 ko) RANE SIXTY-EIGHT V2.0.1 (7369 ko) RANE SIXTY-EIGHT DATASHEET (3243 ko) RANE SIXTY-EIGHT QUICK START INSTALLATION (701 ko)
Manual abstract: user guide RANE SIXTY-EIGHTFADERS ASSEMBLY
Detailed instructions for use are in the User's Guide.
[. . . ] Cleaning is only required to maintain the feel of the crossfader. The crossfader is self-lubricating and with normal use, should not require additional lubrication. If you wish, you can use a light silicone lubricant rated for use with electrical parts. [. . . ] Move the carrier back and forth to distribute lubricant. Do not disturb the position of the small sensors at each end of the Fader. If you accidentally do, make sure the parts are standing straight before reinstalling. caUtion: Sugary liquids may damage the crossfader beyond repair. You might be able to save it by removing the crossfader and thoroughly rinsing it in hot water. Make sure the part is clean and dry before lubricating or reinstalling. Removal of grease or other stubborn debris may require alcohol or contact cleaner. Make sure the part is clean and dry before lubricating or reinstalling. Contact Rane Corporation
cHanneL fader cLeaning
With heavy use in harsh environments, the channel faders may need lubrication. This treatment extends longevity and can make used faders as good as new. The fader assembly must be removed from the Sixty-Eight for proper cleaning. We recommend any of the following cleaning solutions: · Caig DeoxIT FaderLube F100 spray lubricant · Caig DeoxIT FaderLube F5 spray cleaner · CRC 2-26 (www. crcindustries. com) order caiLube McL® from: caig Laboratories, inc. Poway, CA 92064 Phone 858-486-8388 Fax 858-486-8398 Web www. caig. com a. Hold the fader assembly away from the mixer. Spray cleaner/lubricant into both ends of the fader. Move the fader over its full travel back and forth a few times.
customer service at 425-355-6000 or email us at info@rane. com.
e. [. . . ] Remove the four screws for each pair of faders (1 and 2) or (3 and 4). 0 The magnetic crossfader may be removed by the two screws at each end of the crossfader. · Plug in all three cables before installing screws. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE RANE SIXTY-EIGHT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual RANE SIXTY-EIGHT will begin.
RANE SIXTY-EIGHT V2.2 (5724 ko)
