User manual RANE SL 1 QUICK START

[. . . ] Check back regularly for updates, advice and tips. If you are new to computers and installing software, read this section first. See if the version online is higher than the disc you have. If it is the same, proceed to the Mac or Windows installation section. [. . . ] Use model 273-1770 or 273-1768 with Adaptaplug N. See OPTIONAL POWER SUPPLY on page 3 of the manual. oPTIoNAL CoNNECTIoNS To play normal records, connect the THRU OUTPUTS of the SL 1 to the mixer's phono inputs, then select Phono on your mixer for normal vinyl playback. This plays "thru" without disconnecting any wires. To play normal CDs, connect the THRU OUTPUTS to a set of line inputs on the mixer when using CD players (when using Scratch Live with CD players you will need a mixer with a total of four line inputs). This plays normal CDs "thru" without disconnecting any wires. Note: power is required, either from the USB port or an external 9 VDC power supply when using the THRU outputs. * TURNTABLE CoNNECTIoN 1. Connect your turntables to INPUTS 1 and 2 of the SL 1 interface. Note: When connected properly, circles will be displayed within the scope view of the setup screen while playing the control records (see CALIBRATING SCRATCH LIVE in the manual for more info). Connect the turntable ground wires to the ground post of your mixer. Connect the LINE OUTPUTS of the SL 1 to the line inputs (sometimes called CD or AUX) on your DJ mixer -- check that those inputs are switched to line level. Note: If Scratch Live audio is excessively loud or distorted, the LINE OUTPUTS have been connected to phono level inputs by mistake. Connect the USB cable from the SL 1 to your computer as described in the previous section. TO MIC USB TO COMPUTER FROM TURNTABLE OR CD PLAYER OUT FROM TURNTABLE OR CD PLAYER OUT Cd PLAyER CoNNECTIoN 1. Connect your CD players to INPUTS 1 and 2 of the SL 1 interface. Note: When connected properly, circles will be displayed within the scope view of the setup screen while playing the control records (see Calibrating Scratch Live in the manual for more info). Connect the LINE OUTPUTS of the SL 1 to the line inputs on your DJ mixer, check that those inputs are switched to line level. Note: If Scratch Live audio is excessively loud or distorted, the FROM TURNTABLE GROUND FROM TURNTABLE GROUND MIC IN PHONO LINE PHONO LINE GROUND 2 RANE SL 1 FOR SERATO SCRATCH LIVE · QUICK START 2. 0 CALIBRATINg SCRATCH LIVE CALIBRATIoN When setting up Scratch Live in a new location, calibrate the software to the background noise picked up by the needles, cables and CD players. Put one Virtual Deck in INT mode, load a track, press the play button, and turn up the mixer volume and sound system as loud as you will be playing your session. With audio playing through your speakers: a. When using a turntable, place the needle on the record with the motors off and switch to the SETUP screen. When using CD players, pause the CD and switch to the SETUP screen. 2. [. . . ] (Note to iTunes users: files in your iTunes library cannot be deleted this way). Toggle the input reverse switch Clear search string if searching, or exit Scratch Live. slot 1 ctrl - alt - Z Z slot 2 ctrl - alt - X X slot 3 ctrl - alt - C C slot 4 ctrl - alt - V V slot 5 ctrl - alt - B B slot 6 ctrl - alt - N N RIgHT dECK ctrl - or shift - ctrl - shift - shift - alt - ctrl - . (period) ctrl - 6, 7, 8, 9, 0 6, 7, 8, 9, 0 F6 F7 F8 F10 A S d F g H J K L ; ' ctrl - ' alt - A alt - S alt - 6, 7, 8, 9, 0 ctrl - alt - 6, 7, 8, 9, 0 alt - d alt - F alt - P alt - ; alt - space bar (x2) ctrl - K ACTIoN Load the highlighted song to a deck. [. . . ]