User manual RANGEMASTER PROFESSIONAL+ 100 INDUCTION

[. . . ] Simply snap and share a picture of your kitchen and tag #MyRangemaster for the chance to win £200 of Rangemaster cookware. If selected we will also send a photographer round to professionally photograph you at home with your range. You might even feature in some of the UK's top home interest titles!To enter all you have to do is send in photos of your Rangemaster kitchen and tell us in one sentence what makes Rangemaster the heart of your kitchen? [. . . ] The oven can be switched on when the cook symbol [ ] is displayed. This symbol remains visible during normal operation. Once the cooker is connected and switched on, the display flashes (00. To set the clock press the [+] and [-] buttons simultaneously, the point between hours and minutes will start to flash for 5 seconds. Whilst the point is flashing press either the [+] or [-] button to set the correct time. IMPORTANT: The timed oven will not operate unless the clock has been set. program selection - Setting the minute minder The minute minder [ ] provides the ability to set a countdown from 00:01h to 23:59h, at the end of which an alarm will sound. The bell symbol [ ] will flash on the display. Select the desired countdown from 00:01h to 23:59h using the [+] button (Fig. The countdown will automatically begin and the [ ] symbol will show in the display. Once the specified time has elapsed an alarm will sound. re-set the minute minder To re-set the minute minder, first select the minute minder program by pressing the mode [M] button. Then press the [+] and [-] buttons simultaneously. The `cook period', which is the length of time you want the oven to cook for (dur). The `stop time', which is the time of day you want the oven to stop cooking (End). To stop the programmable oven at a specific time of day 1. Press the mode [M] button 3 times, until the display flashes `End' (Fig. Select the `stop time' using the [+] or [-] buttons. The display will show the current time along with the `AUTO' and Cooking [ ] symbols (Fig. When the `stop time' is reached an alarm will sound and the oven will stop working. The word `AUTO' will flash on the display (Fig. Press any button to stop the alarm and return to manual cooking. [. . . ] Any damage, blemishes or chips identified upon receipt of the product must be reported within 7 days ­ proof of purchase may be required to establish validity. Scratches on the surface of ceramic hobs must be reported within 7 days. scratches caused by usage are not covered. Accidental damage is not covered by the manufacturer's warranty. [. . . ]