User manual RAYMARINE CHARTPLOTTER MODE QUICK REFERENCE GUIDE

[. . . ] · Press and hold for 2 seconds for full screen display. WINDOWS OFF ON SELECT WINDOWS VRM/EBL Use to measure range and bearing to/between points. · Position cursor at start point. · Press VRM/EBL key to display the Ruler data box. · Select end point using trackpad · Press ENTER to fix end position of ruler. Chart · Press soft keys to toggle window ON/OFF and to select lower window. [. . . ] · When cursor text is displayed, takes cursor control of the object. · When arrow-head cursor symbol is displayed, drops the object under cursor control. CLEAR · Cancels operation in progress and returns to the previous display. · Deletes an object/function under cursor control. Trackpad · Controls cursor position and the slider values. · Hold the trackpad down to move the cursor faster. POWER · Press and hold until unit beeps to turn on display. · Press for 3 seconds to turn off display. ALARMS RANGE Controls chart scale. Displayed vertical distances shown in the Status Bar. · Press top of key to increase the chart distance. · Press bottom of key to decrease the chart distance. · Press and hold to change the scale faster. Use to set up the chartplotter alarms. · Press to display the Alarms set up menu and soft keys. The soft keys correspond to the selected alarm. ALARMS SET UP ARRIVAL ALARM OFF COURSE ALARM ANCHOR ALARM GROUNDING ALARM COUNTDOWN TIMER ALARM CLOCK 0. 01nm OFF OFF 5M/1. 0nm 00:33:00 OFF MENU Provides access to setup options. · Press to display soft keys. SYSTEM SET UP¬ CHART SET UP¬ TRACK SET UP¬ GPS SET UP¬ · Press soft key to display desired setup menu. · Use trackpad to select option and soft key to change option. · Press ENTER to close menu and CLEAR to to finish. D5562-4 SELECT ARRIVAL ALARM RADIUS · Use the trackpad to select the alarm. · Use the softkeys to adjust parameters and/or toggle the alarm on/off. · Press ENTER to finish. Quick Reference Card: Chart Mode Controls 86067-3 Default Display Chart Range Context Sensitive Cursor Control . CSR 50o 11'908N POS 001o 13'612W . 48nm age vil Pt BRG RNG 147o T 9. 82nm Status Bar When the cursor is positioned over special features on the display, a text label appears to identify the feature. [. . . ] · When you press GOTO CURSOR, a temporary waypoint is added at the · Use to save and name the current route. ROUTE LIST SHOW ROUTE ERASE ROUTE ROUTE INFO NAME ROUTE CLEAR ROUTE · Use the softkeys to edit the current route. · Press UNDO WAYPOINT to remove the last waypoint in a route. · PLACE waypoint to add a waypoint at the end of the route. · Press ACCEPT ROUTE to finish. · Press STOP GOTO to cancel. FOLLOW ROUTE STOP FOLLOW GOTO CURSOR cursor position and the GOTO is started. RESTART XTE WAYPOINT ADVANCE · Press to clear the current route from the display. If it is not saved you are prompted to save the route. · Use the soft keys to manage the route database list. [. . . ]