User manual RAYMARINE PLUS 7INCH MONCHROME RAYCHART LCD QUICK REFERENCE CARD

[. . . ] - Press and hold for 2 seconds for full screen display. WINDOWS OFF ON SELECT WINDOWS VRM/EBL Use to measure range and bearing to/between points. - Position cursor at start point, and press VRM/EBL key to display the Ruler data box. Select end point using trackpad, and press ENTER to fix end position of ruler. Chartplotter Press soft keys to toggle window on/off and to select lower window. [. . . ] Deletes an object/function under cursor control. Trackpad Controls cursor position and the slider values. Hold the trackpad down to move the cursor faster. POWER Press and hold until unit beeps to turn on display. Press for 3 seconds to turn off display. D5704-1 Select a slider using the soft key or trackpad. Toggle between off/on by pressing the soft key again. Adjust slider using trackpad, and press ENTER to finish. ALARMS RANGE Controls chart scale. Displayed vertical distances shown in the Status Bar. - Press top of key to increase the chart distance. - Press bottom of key to decrease the chart distance. - Press and hold to change the scale faster. Use to set up the chartplotter alarms. - Press to display the Alarms set up menu and soft keys, the soft keys correspond to the selected alarm. ALARMS SET UP ARRIVAL ALARM OFF TRACK ALARM ANCHOR ALARM COUNTDOWN TIMER ALARM CLOCK 0. 01nm OFF OFF 00:33:00 OFF MENU Provides access to setup options. - Press to display soft keys. SYSTEM SET UP¬ CHART SET UP¬ TRACK SET UP¬ GPS SET UP¬ Press soft key to display required setup menu, then use trackpad to select option and soft key to change option. Press ENTER to close menu, and CLEAR to finish. SELECT ARRIVAL ALARM RADIUS Use the trackball to select the alarm, then use the softkeys to adjust parameters and/or toggle the alarm on/off. Press ENTER to finish. Quick Reference Card: PLUS Series Mono LCD Chart Display 86057_2 Default Display Chart Range Status Bar Context Sensitive Cursor Control When the cursor is positioned over special features on the display, a text label appears to identify the feature. Depending on the feature, you can then move, re-size or delete it. Text Label A-B BOX COG HDG MOB MRK POS RTE TIDE WPT Feature Ruler line Data box (any type) Course Over Ground Vector Heading Vector Man OverBoard Marker Mark Vessel's Position Route Leg Tide Vector Waypoint WPT Chart Boundary Vessel Position Waypoint 2. WPT 3. Cursor selecting chart object Depth Area Delete (for example, a waypoint) 1. Object data box for object selected by cursor Cursor position box Shows the current cursor position as either Range/Bearing or Lat/Long. [. . . ] Press ACCEPT ROUTE to finish. Use to save and name the current route. Press to navigate to the cursor position. When you press GOTO CURSOR, a temporary waypoint is added at the cursor position and the GOTO is started. Press STOP GOTO to cancel. ROUTE LIST SHOW ROUTE ERASE ROUTE ROUTE INFO NAME ROUTE FOLLOW ROUTE STOP FOLLOW GOTO CURSOR RESTART XTE WAYPOINT ADVANCE Press to clear the current route from the display, if it is not saved you are prompted to save the route. Use the soft keys to manage the route database list. [. . . ]