User manual RCA 27F500TDV

[. . . ] TV/VCR/DVD User's Guide Changing Entertainment. Again. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. [. . . ] If you play a prerecorded tape after the DVD playback, you must set the unit to TV/VCR mode using TV/VCR. When you select the TV/VCR mode during DVD playback, DVD playback will change to the still mode, and after 5 minutes it will change to the stop mode automatically. 32 Special playback Picture Search Reverse picture search function Press REW x 1 or x 2 during the playback. Forward picture search function Press F. FWD x 1 or x 2 during the playback. To return to playback: Press PLAY. Repeat playback The entire video tape will be played until its end. The tape will then automatically rewind to the beginning and the playback will be repeated. SPEED SEARCH TIMES TAPE SPEED SP (Standard Play) LP (Long Play) SLP (Super Long Play) PICTURE SEARCH SPEED PRESS ONCE PRESS TWICE 3X 7X 9X 5X 9X 15 X 1 Press TV MENU. 2 Then press ENTER to select "ON" or "OFF". If "ON" is selected, the playback will be repeated endlessly. or to select MENU TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP //ENTER/MENU Still Picture Press PAUSE/STILL during playback. To resume normal playback: Press PLAY. 3 Press TV MENU until the menu screen is cleared. if you press DISPLAY/CALL, " the screen. " will appear on Slow Motion During playback press SLOW. To return to playback: Press PLAY or SLOW. Slow tracking and vertical lock adjustment If noise bars appear in the picture during slow motion, press the TRACKING + or to reduce the noise bars. If the still picture jitters excessively, press TRACKING + or to stabilize the still picture. 4 To start the playback, press PLAY. The playback will be repeated endlessly. To cancel repeat mode: Follow the above step 1, then press ENTER to select the OFF position. Press TV MENU to return to the TV. Frame by Frame picture Press PAUSE/STILL during playback. To return to playback: Press PLAY or PAUSE/STILL. To monitor a TV program Press TV MONITOR while in the playback mode. The video tape will continue to play while the picture switches to the TV channel selected on the unit. Press the button to return to the playback picture. Adjusting tracking condition Automatic tracking adjustment Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback. Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback, press TRACKING +/ to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment. Press ATR to reactivate automatic tracking again. NOTES: The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION. During picture search mode there will be noise bars which are caused by the system. [. . . ] If not, you must take your unit to the Service Center location at your own expense, or pay for the cost the Service Center may charge to transport your unit to and from your home. To identify your nearest Authorized RCA Service Center, ask your dealer, look in the Yellow Pages, visit www. rca. com, or call 1-800-336-1900. Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required. What your warranty does not cover: Customer instruction. [. . . ]