User manual RCA RCD147

[. . . ] FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Inc. could void the user's authority to operate this product. [. . . ] Thus the batteries life might be shortened when using DC power. 2. Press TUNE DOWN/BACK NEXT to set the year. 4. Repeat steps 2 and 3 to set the month and day. Press SET to confirm settings. 4 Radio EN Tuning to a station 1. Press STANDBY/ON button to turn power on. Press RADIO/BAND to select between AM and FM band. Press TUNE DOWN/BACK or TUNE UP/ NEXT to select radio station. Press VOLUME + / - to adjust to your desired listening level. Setting presets manually 1. Press RADIO/BAND to select between AM/ FM. Press TUNE DOWN/BACK or TUNE UP/ NEXT to access the desired frequency. Press PLAY MODE/PRESET UP repeatedly to assign program number. Repeat steps 2 to 5 to preset to a maximum of 10 channels for FM & AM band. Tip Tip: Extend or reposition the antenna for better FM reception. Move the unit for better AM reception. Auto preset Press and hold RADIO/BAND to set presets automatically. Once a station is found, the search stops briefly to allow you to listen to the station. Tip: Tip Press and hold TUNE DOWN/BACK or TUNE UP/NEXT for more than 1 second to automatically tune to the next station. · Press TUNE DOWN/BACK or TUNE UP/ NEXT at this time if you decide not to store selected station. · If you decide to store the station in preset memory, wait a few seconds and the search will resume. Using presets 1. Press PLAY MODE/PRESET UP to enter preset mode and PRESET 1 shows. Press PLAY MODE/PRESET UP repeatedly to access your desired preset stations. 5 CD player Notes on CD-R/RW This unit is compatible with CD-RW/ CD-R discs for playback. radio). Displaying the Program List 1. While the CD player is stopped, press SET to enter program mode. Press SET repeatedly to review the program list. Programming When player is in CD stop mode, 1. and TRACK (flashing, indicating program position) shows on display. Press TUNE DOWN/BACK or TUNE UP/ NEXT to select the track you want to store in the program. - 3. [. . . ] Product Registration: · Please complete and mail the Product registration Card packed with your unit. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. 11 U. S. Limited Warranty Limitation of Warranty: · THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. [. . . ]