User manual RCA RCU600BL

[. . . ] RCU600BL_IB. qxd 10/17/03 8:09 Page 1 UNIVERSAL Remote universal Consolidates up to 6 remotes Home TheatreTM Keys take full advantage of your Home Theatre equipment with Surround Sound Control Compatible with today's most popular brands. MultiBrand Use See back for most popular brands. RCU600BL remote RCU600BL_IB. qxd 10/17/03 8:09 Page 2 Table of Contents Product Diagram . 3 Battery Information and Installation . 3 Primary Key Descriptions for VIDEO Operations . . 4 Secondary Key Descriptions for AUDIO Operations . [. . . ] (See section on Code Search on page 10). Press and hold the CODE SEARCH key until the indicator light illuminates. The indicator light blinks and then remains lit. Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off. Note: If you enter an invalid code, the LED flashes rapidly for two seconds. Start over at step 3. (OFF) CODE INDICATOR LIGHT SEARCH AUDIO (BLINK) 8 RCU600BL_IB. qxd 10/17/03 8:09 Page 9 6. If your AUDIO component turns off, you have found the correct code. If your AUDIO component does not turn off, repeat steps 3-6 above, entering the next code for your brand. With your AUDIO component on, press the VOL+ (VOLUME UP) key. If the AUDIO component responds, no further programming is required. Enter the code in the box provided on this page for future reference. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote. (See Code Search section on page 10). ON·OFF VOL+ AUDIO SYSTEM CODE Operating AUDIO System Functions The following is a list of instructions for operating Audio functions. Experiment with your AUDIO system to determine which functions work with your components. See the enclosed AUDIO Code List to operate your brand of equipment. TURNING ON THE RECEIVER OR MINI-SYSTEM Point the remote control at the receiver and press the AUDIO key and then the ON·OFF key to turn the system on. SELECTING A COMPONENT INPUT Component inputs such as a DVD player or VCR may be selected depending on the features of your receiver or mini-system. Input selection may be made either by pressing the labeled number key or pressing the FUNCTION key to toggle through the inputs available on your system. Note: You may need to experiment with your system since manufacturers' products do not all work in the same manner. USING THE NUMBER KEYS TO CHANGE AUDIO INPUTS To select a component, press the number key (1-6) that corresponds with the component you want to operate (CD, TAPE, TUNER, TV, VIDEO 1, or VIDEO 2). USING THE FUNCTION KEY TO CHANGE AUDIO INPUTS To select a component, press the FUNCTION key until the input you want to operate appears on your system. [. . . ] If the component can be turned on and off, make sure you press the CH+/CH- key to see if the component responds. If not, try the next code from the list. 13 RCU600BL_IB. qxd 10/17/03 8:09 Page 14 Troubleshooting Problem: The VCR won't record. (continued) · As a safety feature, you must press the RECORD key twice to begin recording. · Make sure the tape is properly loaded in the VCR. · Make sure the tape is not write-protected. [. . . ]