User manual RCA RP8070

[. . . ] FCC Information EN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson multimedia Inc. could void the user's authority to operate this product. [. . . ] In play mode, press INTRO once, INTRO lights up at the selected mode section on the display. To deactivate, press INTRO again and the unit begins playing tack 1 of the disc. Recalling and Editing the Program You must be in Stop mode in order to recall and edit the program. Press PROGRAM to the next program number until you get to the programmed track you want to change. Press DISC SKIP to choose the disc and then press or to choose a replacement track. Press PROGRAM to change the current programmed track to the one you just selected. Repeating Play Order You can repeat one track, one disc or all discs. Providing that the display shows ALL DISCS: 1. Press REPEAT once to play a specific track on a particular disc over and over. Press REPEAT a second time and the display shows REPEAT 1 DISC. With this mode selected, the CD player plays the selected disc repeatedly from start to finish. Press REPEAT a third time, the display shows REPEAT ALL DISCS. Selecting this mode sets the init playing all loaded discs repeatedly. Playing the Program To play your programmed tracks, press PROGRAM then PLAY/PAUSE. Repeating a Program When you program tracks into memory, you can repeat playing the program by pressing REPEAT after the program begins playing. Clearing the Program You cannot select tracks within a program to clear. Upon completion of the following steps, the entire program will be cleared. Press and hold the CLEAR button until CLEAR shows in the display. If the program is already empty, EMPTY will show in the display. Playing and Loading Discs Simultaneously You can open the CD compartment tray without interrupting the playing music. Simply press OPEN/CLOSE once to slide out the tray. While the disc is playing, you can change the rest of the four discs by pressing DISC SKIP to rotate the tray clockwise and anti-clockwise to load 8 RP8070 IB rev3 9 8/14/01, 4:59 PM Using the CD Player EN ALL DISCS 1 5 ATS 2 6 3 7 4 8 5 4 1 DISC 2 9 10 11 12 13 14 15 3 Fig. 3 Using Auto Track Skip (ATS) ATS is the opposite of programmed play. Rather than programming into memory the tracks that you want to hear, with ATS you set the unit to skip those tracks that you don't like. Clearing the ATS Program Clearing the ATS program is also a lot like clearing a regular program. Press and hold CLEAR until CLEAR shows on the display. Creating an ATS Program 1. 3 with a flashing disc number and "_ _". Press or to choose the first track to be skipped. Press PROGRAM to add the seleced track to the ATS program. [. . . ] To identify your nearest Authorized RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. · Show the Authorized Service Center Representative your evidence of purchase date or first rental. · Pick up your unit when repairs are completed. · Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. [. . . ]